Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
3 Align the stand with the TV, as shown. 4 Secure the stand to the column with the four screws provided. Installing a wall-mount bracket 1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the four screws that secure the TV to the base, then remove the base. 3 Remove the four screws holding the stand bracket to the TV, then remove the stand bracket. 4 Secure the wall-mount bracket to the back of your TV using the screws provided with the wall-mount bracket. Setting up your remote control 1 Press down on the battery compartment cover lock, then remove the remote control cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the cover. Make sure that the lock snaps into place. To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit for the latest remote control code information. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station Using HDMI (best) Using component (better) Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. Using S-video (fair) Using composite (fair) Connecting an antenna Connecting a home theater system Using an analog audio cable: Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable. Using a digital audio cable: Note: The DIGITAL OUTPUT jack only works with digital TV channels. Connecting a computer Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 115 DirectTV RC23 10463 RCA RCU807 135 One for All URC-6690 0464 Sony RM-VL600 8043 Comcast M1057 0463 Dish Network VIP508, VIP622 720 Motorola DRC800 0463 TIVO Series 3, HD 0091 Universal remote control makers and models Set-top box makers and models Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007) 40" LCD HDTV I QUICK SETUP GUIDE I DX-40L150A11 Power cord Power outlet Press to change the volume. Press to change the channel. CH^ CH ^ Press to display the Main menu. Press to return to the previous screen. Press to close the menu. Press to select menus, to adjust selected items, or move the on-screen cursor left or right. Press to select the menu items. Press to confirm your selection or enter a sub-menu. Connecting power Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Turning on your TV for the first time 1 Make sure that you have inserted the batteries in the remote control, connected your devices to the TV, and connected the AC power. 2 Press (Power), then wait several seconds. The initial Setup Wizard screen opens (only the first time you turn on your TV) to the Choose your menu Language screen. 3 Press . or . to select the menu language you want, then press ENTER. The Time screen opens with Mode highlighted. 4 Press . or . to highlight Auto (the date/time are automatically set by the TV signal source, based on the time zone you selected) or Manual (to set the date/time manually) mode, then press ENTER. The Choose your Picture Mode screen opens. 5 Press . or . to select Home Mode or Retail Mode, then press ENTER. If you select Home Mode (default - has the same settings as the Energy Savings picture mode), the Choose your TV source screen opens. -ORIf you select Retail Mode (has the same settings as the Vivid picture mode), a message stating “Are you sure you want Retail mode? Since in this mode Energy saving is not realized.” appears. Select Yes to proceed or No to exit. 6 Press . or . to select Antenna, Cable, or Cable/Satellite Box, depending on the type of connection you have. • If you are using an antenna for a standard or HD TV signal, select Antenna. • If your cable is connected directly to the TV (without a tuner box), select Cable. • If your cable is connected to your TV through a tuner box, select Cable/Satellite Box. 7 Press . when you have made your selection. The channel scan screen opens. If you selected Antenna or Cable, your TV automatically scans for available channels in your area and stores the channel information in the channel list. This may take several minutes. While scanning, the TV displays a progress report. – OR – If you selected Cable/Satellite Box, the auto scan is not necessary and the screen will ask you to select the correct input source for your set top box. Press EXIT to close the menu. 8 Select the corresponding video input source through the INPUT SOURCE menu. Selecting the video input source 1 Turn on your TV, then press the INPUT key on the remote, or the INPUT button on the TV. The INPUT SOURCE menu opens. 2 Press . or . to highlight the video source, then press ENTER. You can also select the input source using ...