Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
“SLEEP XX“ or “OFF” is displayed. “XX“ denotes the time in minutes. . 2 When you reach the desired length of time, stop pressing the SLEEP/TIMER button. To deactivate the sleep timer . Press SLEEP/TIMER repeatedly until "SLEEP OFF" is displayed, or press ECO POWER/ STANDBY ON y (or y on the remote). 2; Specifications English AMPLIFIER Output power ....................................... 2 x 10 W RMS Signal-to-noise ratio ....................................... . 60 dBA Frequency response ......... 63 – 20000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.9 V (max. 2 V) Impedance loudspeakers ......................................... 4 . DVD PLAYER Laser Type ................................................ Semiconductor Disc Diameter .............................................. 12cm / 8cm Video Decoding ........................... MPEG-2 / MPEG-1 Video DAC ................................................................ 10 Bits Signal System ............................................... PAL / NTSC Video Format ..................................................... 4:3 / 16:9 Video S/N ........................................... 56 dB (minimum) Composite Video Output ................ 1.0 Vp-p, 75 . Audio DAC .......................................... 24 Bits / 96 kHz Frequency Response .... 4 Hz - 20 kHz (44.1kHz) ...................................................... 4 Hz - 22 kHz (48kHz) ...................................................... 4 Hz - 44 kHz (96kHz) Number of programmable tracks ......................... 16 Signal-to-noise ratio ....................................... . 65 dBA Channel separation .......................... . 40 dB (1 kHz) Total harmonic distortion ............... < 0.1% (1 kHz) TUNER FM wave range ................................... 87.5 – 108 MHz Sensitivity at 75 . – mono, 26 dB signal-to-noise ratio ............ 2.8 .V – stereo, 46 dB signal-to-noise ratio ........ 61.4 .V Selectivity ................................................................. . 28 dB Total harmonic distor tion ..................................... . 5% Frequency response ............ 63 – 5500 Hz (-6 dB) Signal-to-noise-ratio ...................................... . 50 dBA SPEAKERS 2-way bass reflex system Dimensions (w x h x d) .................................................... ....................................................... 125 x 250x 232 (mm) GENERAL INFORMATION AC Power ..................................... 220 – 240 V / 50 Hz Dimensions (w x h x d) . 218 x 90 x 221.5 (mm) Weight(with/without speakers) ........... 4.7 / 1.1 kg Standby power consumption ............................ . 6W Eco power Standby ................................................ < 1W Specifications and external appearance are subject to change without notice. 32 Problem Problem Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. No power. “NO DISC” is displayed. No picture. Distorted or poor picture. The aspect ratio of the screen cannot be changed even though you have set the TV shape. The DVD player does not start playback. Solution .Check if the AC power cord is properly connected. .Check if the disc is inser ted upside down. .Wait until the moisture condensed at the lens has cleared. .Replace or clean the disc, see “Maintenance”. .Use a readable disc or correctly recorded format MP3-CD. .Select the appropriate video input mode on the TV set. .Check if the TV set is switched on. .Check the video connection. .Check if the system is securely connected. .Sometimes a slight picture distor tion may appear. This is not a malfunction. .Clean the disc. .The aspect ratio is fixed on the DVD disc. .The aspect ratio may not be changed for some TV systems. .Inser t a readable disc. .Check the disc type, color system and region code. .Clean the disc. .Place the disc with the playback side down. .Press SYSTEM MENU to turn off the setup menu. .Cancel the parental control rating function or change the rating level. .Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. .Disconnect the power plug from the jack, and inser t again. The DVD player does not respond when buttons are pressed. 33 English Troubleshooting The language for the sound or subtitle cannot be changed when playing a DVD. No image is output when a function is selected. Sound cannot be heard or is of poor quality Poor radio reception. Left and right sound outputs are reversed. The remote control does not function. The timer is not working The Clock/Timer setting is erased Problem Solution .Multi-language sound or subtitle is not recorded on the DVD. .Chang...