Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: LG Dateigröße: 1.03 mb Dateiname: bf7afef6-c24f-44f8-b5f7-26dd880df247.pdf Unterrichtssprache:

DVD Component Video and HD Component Video Some top-of-the-line DVD players use what is called “component video,” for extremely accurate picture reproduction. Refer to your DVD manual for further information. PC and HD-STB Audio Variable Audio Out Audio Center Mode In Input Used to connect Connect to external Used for audio connections either an external Dolby Digital Center from a PC source or HD-STB amplifier, or add a “preamp output.” sub-woofer to your Satellite system. surround sound system. Mini glossary JACK A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color- coded. SIGNAL Picture and sound traveling through cable, or over the air, to your television screen. PAGE 7 Front Connection Panel Front Connection Panel There are four jacks on the right front side behind the screen on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front connection panel. To use the front jacks as the signal source, select them using Main Input menu as described on page 25. They will be named “Front Video” in the Main Input menu. If you select either Front Video or Front S-Video, the Front audio inputs are automatically selected as well. If you’re connecting a video game device, make sure to change the picture settings with the EZ Picture option in the Video menu (see page 29). A connection available on some very high-end equipment Video that provides better picture Connects the video quality than video input. signals from any piece of equipment. Left/Right Audio Used for stereo sound from various types of Front A/V Panel S-VIDEO VIDEO FRONT A/V AUDIO (R) (L)/ MONO S-Video equipment. Mini glossary A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo playback of videocassettes and for higher quality picture and sound from other A/V devices. A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television). PAGE 8 ANT / Cable Service Hookup ANT / Cable Service Hookup Cable TV Wall Jack Panel 1 2 Antenna Connect an antenna and/or cable service to your TV as shown. RF Coaxial Wire (75 ohm) Turn to page 22 to do a channel search with EZ Scan for Ant/Cable connection(s). RF Coaxial Wire (75 ohm) MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 .ANT IN If you receive your RF signal through an antenna that is several years old and connects with two small prongs, you will need to purchase a 300 to 75 ohm adapter. It should be available from your local electronics dealer. We recommend using a 75 ohm cable for your antenna connections in order to prevent interference. For best signal reception, it is recommended to have your Antenna professionally adjusted. PAGE 9 Cable Box Connections Cable Box Connections 1 Cable TV Locate the output jack on the back of Wall Jack Panel your cable box. Connect this to the Antenna jack on the back of your TV. Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions provided with your equipment. This can be combined with any other equipment you may want to hook up. InOut Output Switch 3 4 MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 .ANT IN Audio TV VCR L R Video Output Switch 3 4 RF Coaxial Wire (75 ohm) Cable Box If you’re using a cable box, leave the TV on channel 3 or 4 and use your cable box to change channels. PAGE 10 VCR Connections VCR Connections 1 Locate the Antenna jack on the back of your TV. Connect this to RF out jack on the back of your VCR. Or, find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment. You may connect either the composite video or the S-Video cables to your TV. (Do not connect both the composite and the S- Video cables. In the event that you connect both composite and the S- Video cables, only the S-Video will work.) Cable TV Wall Jack Panel MONITOR OUT VIDEO INPUT 2 VIDEO INPUT 1 S-VIDEO (R) (L) AUDIO VIDEO MONO +75 .ANT IN In Out Audio L R Video 3 4 S-Video Output Switch Antenna RF Coaxial Wire (75 ohm) Round Wire (75 ohm) A/V cables not included with TV VCR Back AV Panel To hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV. If you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the Out to TV jack to the Antenna In jack on the back of your TV. After connecting external equipment to the TV, don’t display a still picture for a long time on the screen. Doing so may damage the TV screen. PAGE 11 DVD Player DVD Play...

Herunterladen

Geben Sie zwei Ziffern: