Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.39 mb Dateiname: Unterrichtssprache:

To register, follow these steps. 1. When the TV displays the 8 or 10-digit registration code, write down the code and go to 2. Download the DivX player software on your computer and install the software. 3. Start the DivX player software and create a DivX Account: Click VOD > Create a DivX Account. 4. In the DivX player, register the TV with the registration code of the TV: Click VOD > Register a DivX Certified Device. 5. When prompted, download and save the registration video to a USB flash drive or your connected media server. 6. Go to your TV and play the registration video on your TV. This completes the registration and activates DivX on your TV. Consult the DivX website for detailed support. To de-register this TV: 1. Press SOURCE. 2. Select [Browse USB], then press OK. 3. Press OPTIONS, select [DivX® VOD], then press OK. 4. Follow the onscreen instructions. 3 Use more of your TV Pause TV What you can do While you watch a digital channel, you can pause a programme to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the programme at any time. Note: . You can pause a programme for a maximum of 90 minutes. What you need . Tune your TV to receive digital channels. See Change your TV settings > Channels > Automatic installation (Page 30). . Connect a USB 2.0 compatible hard drive with a minimum capacity of 4 GB and a minimum transfer speed of 30 megabits per second. For optimal performance, use a hard drive with 32 GB of disk space. Install USB hard drive To pause TV, you must connect a USB hard drive to the TV and format it. If the TV does not recognise the USB hard drive, use a PC to format it to NTFS or FAT32 system, then try again. Caution: . TP Vision is not responsible if the USB hard drive is not supported, nor is it responsible for damage to or loss of data in the device. . Formatting removes all data from the connected USB hard drive. . The USB hard drive is formatted exclusively for this TV. Keep it permanently connected to the TV. You cannot access the contents of the USB hard drive from another TV or PC. . Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Note: . Make sure that the TV and the USB hard drive are switched off. . While you are formatting the USB hard drive, do not connect other USB devices to the TV. 1. Connect the USB hard drive directly to the TV, or if you intend to connect other USB devices in future, connect the USB hard drive through a USB hub. 2. Switch on the TV and the USB hard drive, if it has an external power source. 3. Switch to a digital TV channel. 4. Press to start formatting the USB hard drive. 5. Follow the onscreen instructions to complete the formatting process. Warning: The formatting process may take some time. Do not switch off the TV or disconnect the USB hard drive until this process is complete. Pause a live TV broadcast 1. On a digital channel, press to pause a TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing. C. Where the live programme is currently broadcast. . To watch the stored broadcast, press or to search backward or forward. . To change playback speed, press or repeatedly. . To watch the live TV broadcast, press . Note: If a recording is in progress, you cannot pause the TV broadcast. The stored broadcast on the USB hard drive is deleted if you: . Disconnect the USB hard drive. . Switch the TV to standby. . Start recording a TV programme. . Switch to another channel. . Switch source to watch from a connected device - a Blu-ray disc player or digital receiver. Record TV shows What you can do If your TV can receive programme guides, you can record TV programmes onto a USB hard drive. You can record both current TV programmes as well as future TV programmes. Note: . Recording is only supported in countries with programme guides. . In Nordic countries, the TV provides limited support for subtitles while recording TV programmes. What you need . Tune your TV to receive digital TV channels such as DVB broadcasts. See Change your TV settings > Channels > Automatic installation (Page 30). . Connect a USB 2.0 compatible hard drive with a minimum capacity of 32 GB and a minimum transfer speed of 30 megabits per second. For optimal performance, use a hard drive with 250 GB of disk space. You can use the same USB hard drive to record and pause TV shows. Install USB hard drive To record TV shows, you must connect a USB hard drive to the TV and format it. If the TV does not recognise the USB hard drive, use a PC to format it to NTFS or FAT32 system, then try again. Caution: . TP Vision is not responsible if the USB hard drive is not supported, nor is it responsible for damage to or lo...

Herunterladen

Geben Sie zwei Ziffern: