Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Toshiba Dateigröße: 4.8 mb Dateiname: Unterrichtssprache:

2. Press y or z until TV/CABLE is highlighted. 3. Press x or • to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV. If you use cable, highlight CABLE. MENU yzx • CH yz 4. Press z to highlight CH PROGRAM. SET UP LANGUAGE CLOCK ANT ADD ADDERASE/ TV CH PROGRAM TV / CABLE/ CABLE 1 ANT 1 /2 SET ENGL SHI CORRECT ONIT I LT 0 SET UP LANGUAGE CLOCK ANT ADD ADDERASE/ TV CH PROGRAM CABLE/ CABLE 1 ANT 1 /2 SET ENGL SHI CORRECT ONIT I LT 0 5. Press x or • to start channel programming. The TV will automatically cycle through all the TV or cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “Programming Now—Please Wait” appears. 6. When channel programming is complete, the message “Completed” appears. 7. Press CH y or z to view the programmed channels. IntroductionConnectingyour TV Using theRemote Control Setting upyour TV Using the TV’s Features AppendixIndex 32/36AFX61(E) 23 Setting upyour TV Setting upyour TV Adding and erasing channels manually After you have programmed the channels automatically, you can manually add or erase specific channels. To manually add or erase channels: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons. 2. Press MENU, and then press x or • until the SET UP menu appears. 3. Press y or z to highlight ADD/ERASE. SET UP LANGUAGE CLOCK ANT ADD ADD ERASE/ERASE/ TV CH PROGRAM CABLE/ CABLE 1 ANT 1 /2 SET ENGL SHI CORRECT ONIT I LT 0 4. Press x or • to select ADD or ERASE, depending on the function you want to perform. 5. Repeat steps 1–4 for other channels you want to add or erase. Adjusting the tilt correction feature When you install the TV or change the direction of the TV, the picture may become tilted because of the earth’s magnetic field. If this happens, make the following adjustment. To adjust the tilt correction: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight TILT CORRECTION. 3. Press x or • to correct the picture tilt between +10 and –10. Changing channels To change to the next programmed channel: Press Channel y or z on the TV or remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100). For channels 100 and higher, press the 100 button and then the next two numbers. For example, to select channel 125, press 100–2–5. CHANNELVOLUME TV/VIDEOMENUDEMO MENU x•zyChannel zy Channel Numbers MENU yzx • Channel yz 24 32/36AFX61(E) Introduction Connecting your TV Using the Remote Control Setting up your TV Using the TV’s Features Appendix Index 32/36AFX61(E) 25 Using the TV’s features Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time. To switch between two channels: 1. S...

Herunterladen

Geben Sie zwei Ziffern: