Stimmen - 3, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A AAV VV3 33 input source using the I IIN NNP PPU UUT TT button on the remote control. GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. NOTE! EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable (Except 42/50PG1***, 32PC5***) EXTERNAL EQUIPMENT SETUP GG If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received. NOTE! AV IN 3 L RS-VIDEOVIDEO OUTPUT SWITCH ANT IN ANT OUT Connect the S-VIDEO output of the VCR to the SS--VVIIDDEEOO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AA VV 33 input source with using the IINNPPUUTT but- ton on the remote control. 2 3 4 1 1 2 OTHER A/V SOURCE SETUP(Except 42/50PG1***, 32PC5***) AV IN 3 Camcorder Video Game Set VIDEO L R 1 EXTERNAL EQUIPMENT SETUP 1 Connect the A AAU UUD DDI IIO OO/V VVI IID DDE EEO OO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red) 2 3 Select A AAV VV3 33 input source using the I IIN NNP PPU UUT TT button on the remote control. Operate the corresponding external equipment. Refer to external equipment operating guide. EXTERNAL EQUIPMENT SETUP PC SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. Connecting with a D-sub 15 pin cable Only 32PC5*** HDMI INHDMI/DVI IN AUDIO (RGB/DVI) RGB(PC) 2C IN ROL) AV 1V 1 AVV 2 1 2 VIDEO AUDIO NENT INCOMPONENT IN AV 2V 2RS-232C IN (CONTROL&SER(CONTROL&SERVICE)VICE) ANANTENNAHDMI INHDMI IN 2 RGB IN (PC) AUDIO INAUDIO IN (RGB/DVI)(RGB/DVI) AUDIO 1 2 EXTERNAL EQUIPMENT SETUP AUDIO RGB OUTPUT RGB OUTPUT 1 Connect the RGB output of the PC to the R RRG GGB BB ( ((P PPC CC) )) jack on the TV. 2 Connect the PC audio output to the A AAU UUD DDI IIO OO jack on the TV. 3 Turn on the PC and the TV. 4 Select R RRG GGB BB P PPC CC input source using the I IIN NNP PPU UUT TT button on the remote control. EXTERNAL EQUIPMENT SETUP NOTE! GG To enjoy vivid picture and sound, connect the PC to the TV. GG Avoid keeping a fixed image on the TV ’s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible. GG Connect the PC to the RGB (PC) port of the TV; change the resolution output of PC accordingly. GG There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolu- tion or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the man- ufacturer of the PC graphic card. GG The synchronization input waveform for Horizontal and Vertical frequencies are separate. GG We recommend using 1024 x 768, 60Hz (32PC5*** VGA PLASMA TV Models)1024 x 768, 60Hz (42PG1***,42PG2*** XGA PLASMA TV Models)/1360 x 768, 60Hz(50PG1***, 50PG2***) for the PC mode, these should pro- vide the best picture quality. GG If the resolution of PC is over SXGA, there will be no picture on the TV. GG Connect the audio cable from the PC to the Audio input on the TV.(Audio cables are not included with the TV). GG If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of the cable. This provides the best picture quality. ! GG To enjoy vivid picture and sound, connect the PC to the TV. GG Avoid keeping a fixed image on the TV ’s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible. GG Connect the PC to the RGB (PC) port of the TV; change the resolution output of PC accordingly. GG There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolu- tion or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the man- ufacturer of the PC graphic card. GG The synchronization input waveform for Horizontal and Vertical frequencies are separate. GG We recommend using 1024 x 768, 60Hz (32PC5*** VGA PLASMA TV Models)1024 x 768, 60Hz (42PG1***,42PG2*** XGA PLASMA TV Models)/1360 x 768, 60Hz(50PG1***, 50PG2***) for the PC mode, these should pro- vide the best picture quality. GG If the resolution of PC is over SXGA, there will...
Dieses Handbuch ist für folgende Modelle:Fernseher - 32PC54 (2.17 mb)
Fernseher - 42PG200R (2.17 mb)
Fernseher - 50PG100R (2.17 mb)
Fernseher - 50PG200R (2.17 mb)