Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The selected programme will be saved to your favourite. □ To use Favourite Press the FAV button. The favourite list will appear. Select the desired preset favourite programme from Favourite List A-D. □ Automatically Setting Up Programme SETTINGS ^ SETUP ^ Auto Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. ^ If Input Source is not connected properly, programme registration may not work. ^ Auto Tuning only finds programmes that are currently broadcasting. ^ If Lock System is turned on, a pop-up window will appear asking for password. D Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a programme). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. □ Cable DTV Setting SETTINGS ^ SETUP ^ Cable DTV Setting [In Cable mode only] When Channel Auto Update is On, you can update information for all the programmes that can be updated, including the programme currently being watched. When Channel Auto Update is Off, you can only update information for the programme currently being watched. ^ The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country. ^ If number of supported Service Operator for each country is 1, corresponding function becomes inactive. ^ You can not select the Cable DTV Setting when the service operator is set to fit -7. JJ Ziggo . □ To use Manual Tuning SETTINGS ^ SETUP ^ Manual Tuning Adjusts programmes manually and saves the results. For digital broadcasting, signal strength and signal quality can be checked. For analogue broadcasting, you can set up station names and use fine tuning. Normally fine tuning is only necessary if reception is poor. □ To edit programmes SETTINGS ^ SETUP ^ Programme Edit Edits the saved programmes. Set as favourite programme, block/unblock programme, skip programme etc. of the selected programme. Press TEXT button. [depending on the country] Teletext is a free service provided by the TV station that offers text-based information about TV programmes, news and weather. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. • Colour button: To select the preceding or following page. • Number button: Enters the desired page number. • P0 : To select the preceding or following page. □ Special Teletext Function Press T. OPT button. Select the Text Option menu. • ID Index : Select each index page. • [H Time : When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. • H Hold : Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. • 13 Reveal : Select this menu to display concealed information, such as solutions to riddles or puzzles. • H Update : Displays the TV picture on the screen while waiting for a new teletext page. • Language [In Digital Mode Only] : Sets Teletext language. Press the TEXT button. [In UK/Ireland only] The TV gives you access to digital teletext which gives much better text,graphics etc. than older analogue teletext. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. D Teletext within digital service 1 Press the numeric or P0 button to select a certain service which broadcasts digital teletext. 2 Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc.. 3 Press the number or P0 button to use a different digital teletext service. D Teletext in digital service 1 Press the numeric or P0 button to select a certain service which broadcasts digital teletext. 2 Press the TEXT or colour button to switch on teletext. 3 Follow the indications on digital teletext and move onto the next step by pressing OK, Navigation, Red, Green, Yellow, Blue or NUMBER buttons etc.. 4 Press the TEXT or colour button to switch off digital teletext and return to TV viewing. SETTINGS ^ OPTION ^ Data Service [Depending on country] This function allows users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time. If only one ...
Dieses Handbuch ist für folgende Modelle:Fernseher - 42CS460 (6.72 mb)
Fernseher - 42LS340T (6.72 mb)