Stimmen - 5, Durchschnittliche Bewertung: 4.4 ( )

Hersteller: Sony Dateigröße: 590.75 kb Dateiname: 3858033211.pdf Unterrichtssprache:

4 Select ON or OFF with + or – and press OK. VISUAL MODE PICTURE CONTROL STANDARD MILD MOVIE OPC: OFF Sel ec t and press OK 5 Press MENU to erase the main menu. About the Auto Head Cleaner The auto head cleaner built into this set automatically cleans the video heads when a cassette is loaded or unloaded. If the effect of head cleaning is not sufficient even after a cassette has been loaded/unloaded several times, clean the heads using the Sony V-25CL video head cleaning cassette. For details on head cleaning see page 42. Additional Operations 37 Connecting Optional Equipment Watching the Picture Input from Optional Equipment Rear to video/audio outputs GB Inside the front panel to 21-pin EURO-AV connector VMC-212CE EURO cable (not supplied) To watch the video input signal Press … repeatedly until the desired input indicator appears on the screen. · … 1 for audio/video input or RGB input through the W connector · Do not play equipment connected to the W connector, such as a VCR, during recording a programme to which the Pay-TV decoder is set. If you do so, the playback signal of the connected equipment will be recorded. · … 2 for audio/video input through the … 2/ 2 jacks on the front panel • If you play equipment connected to the W connector, such as a VCR, while watching a programme to which the Pay-TV decoder is set, the TV is automatically switched to the input through the W connector. When you are watching a programme to which the Pay-TV decoder is not set, the TV is not automatically switched. Additional Operations 38 Editing with Another VCR Using an additional VCR, you can edit a tape. Editing from another VCR Connections are the same as in “Watching the picture input from optional GB equipment.” Editing onto another VCR Rear VMC-212CE EURO cable (not supplied) to 21-pin EURO-AV connector Watching the Pay-TV Channel After connecting the pay-TV decoder to the W connector using VMC212CE EURO cable, set the Pay-TV decoder following the steps in “Setting a Pay-TV channel“ (page 12). Rear to 21-pin EURO-AV connector VMC-212CE EURO cable (not supplied) Additional Operations 39 Additional Information Troubleshooting Function Problems Possible causes and remedies TV reception No picture (screen is · The mains lead is disconnected. dark), no sound / Connect the mains lead. · The video TV is switched off. / Press ;, PROGR +/– or programme number on the Remote Commander, or PROGR +/– on the video TV. Good picture but no · The headphones are connected to 2 jack. GB sound / Disconnect the headphones. · The ¤ is displayed on the screen. / Press ¤. · Press A +/–. No colour or poor · Adjust “CONTRAST,” “COLOUR,” and “BRIGHTNESS” in the colour(screen is PICTURE CONTROL menu. (page 18) dark) for colour programmes, but good sound. No picture, no · The connecting cord between the video TV and the input source is sound disconnected. from video input / Connect it firmly. source · Input is not selected correctly. / Press … until the desired input indicator appears. (page 38) Clock and The clock has · The power has been interrupted, the U switch is turned off or the timer stopped and “--/--” mains lead is disconnected for more than a week. is displayed. / Re-set the clock and timer settings if necessary. (pages 15, 26) Playback Power is on, but the tape does not run. · The safety device has been activated. / Switch off, disconnect the mains lead, and leave the set for about one minute. Poor playback picture · The COLOUR SYSTEM switch is set to incorrect position. / Set COLOUR SYSTEM to the position corresponding to the colour system with which the tape is recorded. (page 23) · Adjust the tracking. (page 36) · The video heads are dirty. / Clean the heads using the Sony V-25CL video head cleaning tape (page 42). If the cleaning tape is not available in your area, have the heads cleaned at your nearest Sony service facility. (Do not use a commercially available wet-type cleaning tape, as it may damage the video heads.) · The tape is worn out. / Use a new tape. The sound drops · The tape is defective. out. / Use a new tape. Additional Information 40 Function Problems Possible causes and remedies Recording The cassette is ejected when you press REC r. · The safety tab of the cassette has been removed. / Cover the tab hole with adhesive tape, or use another cassette with a safety tab. (page 22) Recording cannot be done. · No cassette has been inserted. / Insert a cassette with the safety tab. · The tape is at its end. / Rewind the tape. GB Timer recording Timer settings cannot be made. · The clock has not been set. / Set the current time and date. (page 15) · You have made a mistake when setting the timer. / Check the setting steps. (pages 26 to 28) The cassette is ejected · The safety tab of the cassette has been removed. when you press / Cover the tab hole with adhesive tape, or use another cassette TIMER REC ON/ with a safety tab. OFF. The TIMER REC lamp · No cassette has been inserted. does not light up / Insert a cassette w...

Herunterladen

Geben Sie zwei Ziffern: