Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
•ZOOM ZOOM Enlarges the 4:3 image to the entire screen. (Recommended for Letter Box) Stretches to justify the 4:3 image to the four corners of the screen. (Recommended for normal TV broadcast) •4:3 Side bar Standard (Note that “Image retention” of the side bar may occur from displaying it for a long time.) Note•480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9): FULL, JUST, 4:3 or ZOOM •1080p / 1080i / 720p: FULL, H-FILL, JUST, 4:3 or ZOOM •When the signal is 720p/1080i/1080p, the aspect mode automatically defaults to Full after turning off the TV, after changing input mode, or after changed signal resolution other than 720p/1080i/1080p. •Zoom adjust Vertical image position and size can be adjusted in “ZOOM”. Select “Zoom adjust” on the “Picture” menu. (p. 26-27) V-position: Vertical position adjustment V-size: Vertical size adjustment Technical Information Ratings FAQs, •To reset the aspect ratio (OK) Technical Information (Continued) Data format for SD Card browsing Caution •A JPEG image modified with a PC may not be displayed. Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standards Data format: Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0) Max. number of files: 9,999 Image resolution: 160 x 120 to 10,000,000 * DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard ** EXIF (Exchangeable Image File Format) •Partly degraded files might be displayed at a reduced resolution. • Note Folder structure viewed in PC DCIM Created automatically 100_PANA 3-digit folder number + 5-digit arbitrary characters 4-digit arbitrary characters + 4-digit file number P1000001.JPG P1000002.JPG •Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_” P1000003.JPG P1000004.JPG •The folder and file names may be different depending on the digital camera used. •For the suitable SD Memory Cards, please confirm the latest information on the following website. (This site is in English only) SD Card warning messages Message Meaning Is memory card in? •The card is not inserted. No file •The card has no data or this type of data is not supported. Cannot read file •The file is broken or unreadable.•The TV does not support the format. GalleryPlayer warning messages Cannot display image due toincorrect ID data. •There is a problem with decoder of your TV.•If this message appears, please contact Panasonic Service Center for assistance. Refer to page 54, 56 (Limited Warranty), page 55 (Customer Services Directory) Cannot display image on SD card. •There is a probrem with the data. Check the data inside the SD card. Cautions in handling SD Card: •Do not remove the card while the unit is accessing data (this can damage card or unit).•Do not touch the terminals on the back of the card.•Do not subject the card to a high pressure or impact.•Insert the card in the correct direction (otherwise, card may be damaged).•Electrical interference, static electricity, or erroneous operation may damage the data or card. •Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) DIGITAL AUDIO OUT terminals You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the DIGITAL AUDIO OUT terminals. •Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.•External speakers cannot be connected directly to PROG OUT terminals. •When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC channel is selected, the output will be PCM. Caution EZ SyncTM “HDAVI ControlTM” EZ SyncTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 30) •This function may not work normally depending on the equipment condition.•The equipment can be operated by other remote controls with this function on even if TV is in Standby mode. •Image or sound may not be available for the first few seconds when the playback starts.•Image or sound may not be available for the first few seconds when Input mode is switched.•Volume function will be displayed when adjusting the volume of the equipment. •If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2), EZ SyncTM is available for the terminal with the smaller number. •If you connect the equipment that has “HDAVI Control 2” function to the TV with HDMI cable, the sound from DIGITAL AUDIO OUT terminal can be output as multi channel surround. HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices. HDMI-compatible equipment (*1) with an HDMI or DV...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-42PE77U (6.61 mb)