Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Blodgett Dateigröße: 459.07 kb Dateiname: Unterrichtssprache:

Anoptional rearward-extending flue riser is available to increase the overalldepth to match a deep battery. Battery-design assistance is available! by OPTIONAL OIL FILTRATION. Simple two step operation: Step 1, open blue handlevalve to drain oil into filter pan. Step 2, open red handlevalve to return oil from filter to fryer. Self-aligning filter piping makes it easy to assemble anddisassemble Larger 3” (7.6 cm) drain line allows for faster drainingwithout clogging Light weight, removable filter pickup assembly, with built- in handle, for fast media cleaning under busy conditions High flow pump and large return lines produce faster oilrefill times Large filter media collects more debris, which extendstime between changes. B16-PF45 shown MODELS B16-PF45 AND B20-PF65 APPROVAL/STAMP (Location of Optional Rear Gas Connection) 5-1/2” (140) SHIPPING CRATE DIMENSIONS & WEIGHT (Door entry clearance when uncrated is 16.5” for model B16-PF45 and 20.5” for model B20-PF65) Model Width Height Depth Volume Weight B16-PF45 20.0 (508) 45.0 (1143) 42.5 (1080) 22.1 cu ft (0.63 cu m) 210 lbs (95 kg) B20-PF65 23.0 (584) 41.0 (1041) 43.0 (1092) 23.5 cu ft (0.66 cu m) 265 lbs (120 kg) Dimensions are in inches and (millimeters) Model B16-PF45 Model B20-PF65 TOP VIEWS Flue riser for “deep” depth-option extends rearward 6” (frypot size is the same as for “standard” depth) 9” (178) 0(0) Model B16-PF45 Model B20-PF65 FRONT VIEWS SIDE VIEW 31-3/4” (808) 2” (51) 16” (406) 20” (508) 7” (178) 2-3/4” (70) 2-3/4” (70) 36” Flue Riser 24” Flue Riser 36” (914) 30” (762) 6” (152) 60” (1524) 72” (1829) 33-3/4” (859) 4-1/2” (114) Front Gas Manifold 43-3/4” (1112) 40” (1017) 37-3/4” (960) 34” (864) SHORT FORM SPECIFICATIONS The item shall be a sectional fryer with a stainless steel frypot and cabinet. The frypot shall have a large cold zone, and hanve widely spaced tubes to enable easy cleaning. The itemshall have a pilot ignition system and a 100% safety shutoff. UTILITY INFORMATION GAS: Each unit has a 1-1/4" front gas manifold that couples to the adjacent sectional unit(s), and can be ordered with a 1" rear gas connection with a male NPT connector. Minimum supply pressure is 7" W.C. for natural gas, 11" W.C. for propane. All sectional units require a regulated gas supply; pressure regulator to be ordered separately. If using a flexible-hose gas connection, the I.D. of the hose must not be smaller than the connector on the unit and must comply with ANSI Z21.69. Provide an adequate means of restraint to prevent undue strain on the gas connection. FLUE EXHAUST: Installation under a vented hood is recommended. MODEL GAS (BTU/hr) Natural Gas Propane B16-PF45 110,000 110,000 B16-PF65 150,000 150,000 OTHER TECHNICAL INFORMATION If casters are used with flex hose, a restraining device should be used to eliminate undue strain on the flex hose. Minimum clearance from non-combustible construction is zero. Minimum clearance from combustible construction is 10” on sides and 6” on rear. Check local codes for fire and sanitary regulations. NOTE: The company reserves the right to make substitutions of components without prior notice BLODGETT 1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA Phone: (877) 255-3976 • Fax: (866) 644-1354 Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY P/N BR00042 Rev A (2/08) ...

Herunterladen

Geben Sie zwei Ziffern: