Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
V.Installation Off On Off: Sets fan to the horizontal installation mode. On: Sets fan to the vertical installation mode. Notes: • This functions when display is turned on. • This mode is available for TH-42PH9UK, TH-50PH9UK. • Vertical installation is available for TH-42PS9UK without this mode setting. • Turn up the power switch for the upward direction when you set Display vertically. Rotate Off On Off: Does not rotate the image. On: Rotates the image 180 degrees. Serial Slot Select Slot1 Slot2 Slot3 Selects the slot which communicates serial. Note: The setting of an external command can be set only from the fixed serial terminal (see page 11) Normalization When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again. Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The “SHIPPING” menu is displayed and the lock is released when it disappears. Shipping condition This function allows you to reset the unit to the factory setting. 1 2 2 Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press and hold till the SHIPPING menu is 3 displayed. Press to select “YES”. 4 SHIPPING YES Press to confirm. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”. 3 Press and hold the ENTER button till the SHIPPING menu is displayed. 4 Press the Volume Up “+” or Down “–” button to select “YES”. 5 Press the ENTER button. Note: Press the R button to return to SET UP menu when SHIPPING menu is displayed. 1/2PC OFF STANDBYSAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound Volume (Check whether the mute function has been activated on the remote control.) No Picture No Sound Not plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote control.) No Picture Normal Sound If a signal with a non-applicable color system format, or frequency is input, only the input terminal indication is displayed. No Color Normal Sound Color controls set at minimum level. (see page 23, 24) COLOR SYSTEM (see page 39) No remote control operations can be performed. Check whether the batteries have discharged completely and, if they have not, whether they were inserted properly. Check whether the remote control sensor is exposed to an outdoor light or a strong fl uorescent light. Check whether the remote control designed specifically for use with the unit is being used. (The unit cannot be operated by any other remote control.) A cracking sound is sometimes heard from the unit. If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. There are no adverse effects on the performance or other aspects. The top or bottom of the picture on the screen is cut off when I use the zoom function. Adjust the position of the picture on the screen. Areas at the top and bottom of the screen where the image is missing appear when I use the zoom function. When using a video software program (such as a cinema size program) with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen. I can hear sounds coming from inside the unit. When the power is turned on, a sound of the display panel being driven may be heard: This is normal and not indicative of malfunctioning. This Plasma Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction. Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound Volume (Check whether the mute function has been activated on the remote control.) No Picture No Sound Not plugged into AC outlet Not switched on PICTURE and BRIGHTNESS/Volume setting (Check by pressing the power switch or stand-by button on the remote control.) No Picture Normal Sound If a signal with a non-applicable color system format, or frequency is input, only the input terminal indication is displayed. No Color Normal Sound Color controls set at minimum level. (see page 23, 24) COLOR SYSTEM (see page 39) No remote control operations can be performed. Check whether the batteries hav...
Dieses Handbuch ist für folgende Modelle:Fernseher - TH-37PH9UK (2.76 mb)
Fernseher - TH-50PH9UK (2.76 mb)
Fernseher - TH-42PS9UK (2.76 mb)