Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
If you select “Yes”, Screen enters store demonstration mode. To display the “Please select your viewing environment” screen again as shown above and select “Home”, do one of the following: • Press and hold down the front POWER button. • Unplug the TV and plug it again. Auto channel setup Select “ANT/Cable setup” First time setup Language Network setting ANT/Cable setup next select ¦Press to exit from a menu screen VIERA CAST setting Clock Input labels Select “ANT in” Cable ANT/Cable setup ANT in Auto program ANT in set Cable: Cable TV ¦Press to return Antenna: Antenna Not used: Skip TV tuning to the previous select screen go to Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. Typical when Cable/Satellite box is connected to a TV input. Prevents accidental tuning to an unavailable signal. ¦Press to exit from ¦Press to exit from a menu screen Select “Auto program” Cable ANT/Cable setup ANT in Auto program next select Select scanning mode (ALL channels/Analog only/Digital only) Auto program All channels Analog only Digital only ok select Auto program Progress Number of analog channels Number of digital channels 8% 10 0 Press RETURN to quit. RETURN Start scanning the channels Available channels (analog/digital) are automatically set. All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only Confirm registered channels program CancelApply Caption Favorite Add ... Yes ... Yes ... Yes select “Apply” ... ... ... ok If OK is not pressed after selecting “Apply”, the channels will not be saved. The channel will be saved when no operation is performed for 60 seconds and the “Manual program” menu will also exit automatically. If you perform scanning more than twice, previously saved channels are erased. Network setting First time setup Language VIERA CAST setting Network setting Clock ANT/Cable setup Input labels select Note ok Network setting (p. 44-45) To change setting (Language/ VIERA CAST setting ANT/Cable setup/ First time setup Language VIERA CAST setting Network setting Clock ANT/Cable setup Input labels select Network setting/ Quick First Time Setup VIERA CAST setting/ Clock/Input labels) later, go to Menu screen (p. 36) ok VIERA CAST setting (p. 46-47) First Time Setup (Continued) Adjust the clock First time setup Language VIERA CAST setting Network setting Clock ANT/Cable setup Input labels Mode next Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute) select Auto: The clock is adjusted automatically via Internet service. Only available when the TV is on a network. Manual setting Manual 2009 1 7 10 AM Mode 10 NSTTime zone Off Clock Year Month Day Hour Minute DST Set “Network setting” and set “VIERA CAST setting” first. (Time zone/DST) select item Year Month Day Hour Minute Select the year Select the month Select the day Adjust the hour Adjust the minute Time zone Select your time zone. Auto20092009/ 6/11 8:07AM Clock Mode Year EstTimezone OnDST Auto setting (EST/CST/MST/PST/AKST/ HST/NST/AST) DST Set DST (Daylight Saving Time) setting. (On/Off) On: Advances the clock one hour from the time is set according to the time zone. Set the Input labels First time setup Language VIERA CAST setting Network setting Clock ANT/Cable setup Input labels GAME Input labels Component 1 Component 2 HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2 PC next select Note select About broadcasting set systems Analog (NTSC): or broadcasting Conventional Digital (ATSC): New programming that allows you to view Select OKRETURNDeleteABC > abc YG Video 2 PC G A A Switches Input mode alphabet to more channels numeric featuring Label: [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/AUX/RECEIVER/ high-quality video COMPUTER/Blu-ray/CAMERA/DVD REC/HOME THTR/MONITOR/MEDIA and sound CTR/MEDIA EXT/OTHER ¦Press to exit from a menu screen Watching TV Connect the TV to a cable box/cable, set-top-box, satellite box or antenna cable (p. 11-14) Quick Viewing Watching TV First Time Setup To watch TV and other functions Turn power on (TV) or Note If the mode is not TV, press and select TV. (p. 26) Select a channel number up down or ¦To directly input the digital channel number When tuning to a digital channel, press the button to enter the minor number in a compound channel number. example: CH15-1: (TV) Note Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal reception between cable TV and antenna. (p. 16, 51) The channel number and volume level remain the same even after the TV is turned off. Listen with SAP (SecondaryAudio Program) ¦Select Audio Mode for watching TV Digital modePress SAP to select the next audio track (if available) when receiving a digital channel. Audio track 1 of 2 (English) Analog modePress SAP to select the desired audio mode. • Each press of SAP will change the audio mode. (Stereo/SAP/Mono) Closed caption ¦Switches Closed caption mode On or Off Closed caption On Closed caption Off Display theSUB MENU ¦Pr...
Dieses Handbuch ist für folgende Modelle:Fernseher - TCP42G10 (6.63 mb)
Fernseher - TCP46G10 (6.63 mb)
Fernseher - TCP54G10 (6.63 mb)