Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Panasonic Dateigröße: 2.26 mb Dateiname: Unterrichtssprache:

Cable .You need to subscribe to a cable TV service to enjoy viewing their programming. .You may need to subscribe to a high-definition (HD) cable service to enjoy HD programming. The connection for high-definition can be done with the use of an HDMI or Component Video cable. (p. 12) Note .When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV. .When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. .For additional assistance, visit us at: AV cable connection AV cable connection Good Basic (Not HD) Best To use HDMI terminals HDMI-DVI Conversion cable Component/AV adapter (not in use) white white red red AV Equipment LRHDMI AV OUT DVI OUT AUDIO OUT e.g. Blu-ray Discplayer AV Equipment e.g. Blu-ray Discplayer To use COMPONENT terminals LRYPBPRAUDIO OUT COMPONENT VIDEO OUT white whitewhite white red red red green blue blueblue blue red red red green/ yellow red green red green Component/AV adapter AV Equipment e.g. Blu-ray Discplayer To use COMPOSITE terminals yellow white AV Equipment green/ yellow white red Component/AV adapter (not in use) e.g. DVD Recorder or red e.g. VCR red LRCOMPOSITE OUT yellow white red yellow white Note .In some cases, it is not possible to connect depending on the type of cable or equipment. .The Green/Yellow terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection. When using COMPOSITE (VIDEO IN) connection the Yellow connector (Video) should be inserted into Green/Yellow connection. Input select: select Comp.Video (For more details, please refer to eHELP (p. 17). ) 13 Audio connection DIGITAL AUDIO IN e.g. Amplifier Audio equipment Optical cable PC / Computer connection (VGA) PC OUT Computer RGB PC cable Audio cable Connect cable which matches the audio out terminal on the computer Audio OUT Conversion adapter (if necessary) white white red red Component/AV adapter (not in use) Cable Binding Instructions To attach hole Insert To bundle To remove To loosen Keep pushing both sides till they snap Snaps Set hooks knob Keep pushing the knob Cable clamper .Do not bundle the Antenna cable and AC cord together (could cause distorted image). .Fasten the cables with the Cable clamper as necessary. .When using the options, follow the option’s assembly manual to fix cables. Identifying Controls TV controls/indicators Front of the TV Remote control sensor within about 23 feet (7 meters) in front of the TV set Power indicator ( on: red, off: no light) Back of the TV Volume up/down Selects channels in sequence POWER button Changes the input mode Chooses Menu and Submenu entries (Press and hold down for MENU function) • An image of the control panel is displayed on the screen while using it. C.A.T.S. (Contrast Automatic Tracking System) Note The TV consumes a small amount of electric energy even when turned off. Do not place any objects between the TV remote control sensor and remote control. Remote control 14 Switches TV On or Off (Standby) Displays 3D settings. (p. 16) Select source to watch Displays or removes the information banner Displays Main Menu Displays Option Menu for special functions (when available) Colored buttons (used for various functions) Sound Mute On/Off Changes aspect ratio and zoom Volume up/down Switches to previously viewed channel or input External equipment operations Closed caption On/Off Lights the buttons for 5 seconds Press again to turn off the button lights Selects Secondary Audio Programming Exits from Menu screen Displays VIERA Connect Home screen Displays VIERA TOOLS menu Selects/OK/Change Go back to previous menu Operates the Favorite channel list function Viewing from external media (SD/USB) Channel up/down, when viewing from ANT/ Cable source Numeric keypad to select any channel or press to enter alphanumeric input in menus Use for digital channels Displays eHELP (built-in manual) (p. 17) First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet and the “Auto power on” is set to “No”. (Press MENU --> Setup --> Advanced setup -->Auto power on) Turn the TV On with the POWER button (TV) (Remote) or Setup the following items .Select your language .Select your country .Select your viewing mode (Be sure to select “Home Use”) If you select “Store Demonstration” by mistake, confirmation screen will be displayed. To display the “Set viewing mode” screen again and select “Home Use”, do one of the following: • Press and hold down the rear POWER button for at least five seconds. • Unplug power cord for 30 seconds and plug in again. .ANT/Cable setup Select and set the settings according to your ANT/Cable environment. Select “Yes” on the confirmation screen, to start the scanning process. After scanning is finished completely, press OK to continue. .Label the inputs for easy identification To name e...

Herunterladen

Geben Sie zwei Ziffern: