Stimmen - 5, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
.. Dial-up Internet service cannot be used for EASY IPTV. Select wired or wireless connection If the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection. If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use a wireless network. Connecting to the Internet Wired connection (Directly connected) If you are not using the network for connecting anything else but the TV, you could just connect the TV directly to the Cable/DSL Ethernet connection. Wired connection (Using Router) If you are using the network for connecting various equipments and want to connect the TV, you should use a router to connect the TV to the Internet Wireless connection If you are using the network for connecting various equipments and want to connect the TV, you could also use a wireless LAN adapter and Access point to connect the TV to the Internet Internet Internet A B C LAN cable LAN cable (shielded) (shielded) Back of TV Back of TV Modem Modem Hub, Router or Access point Network camera Ensure to use a LAN straight cable for this connection. DLNA Certified media server (for example, PC, etc.) Home network (DLNA feature) .. To use only DLNA features or Network camera, you can operate the features without Broadband network environment. DLNA Certified media server Network camera LAN cable (shielded) Ensure to use a LAN cross cable for this connection. Back of TV Using Network 40 Network settings This is a setting for connecting to a broadband environment. .. Press to exit from a menu screen .. Press to go back to the previous screen Display the menu Select “Network settings” Menu Setup 1/2 ANT/Cable setup Input labels Network settings VIERA Link settings ECO/energy saving Channel surf mode Language Clock All select Select the settings and set select adjust Menu Network settings Network cameras list Software update Mac address Connection test Network connection Wireless network IP address/DNS settings Wireless (WiFi) 00-0b-97-7c-65-e9 Connection test Check that the Network settings are as shown below, and then start “Connection test”. Select “Connection test” and press OK (It takes a while to cancel the test.) Displayed Connection test screen Connection test Check Ethernet cable connection Validate IP address Check for IP address duplication Check connection to the Internet Check communication with EASY IPTV server. Test in progress... Complete Connection test Success-->Completion screen is displayed. Error-->Follow the directions on screen to complete the setting. If you perform the Proxy settings, check the Proxy address and the Proxy port number. Network connection Select Network type (Ethernet cable/Wireless (WiFi)) Wireless network (Confirm Current settings and status) This setting is performed only when “Wireless (WiFi)” is selected in “Network connection” above. .. Displayed “Current settings and status” screen (If connected with wireless LAN adapter) You can confirm the AP connection status. (SSID/Wireless type/Security type/Encryption type/Connection status /Signal strength) Press “Wireless network” (example) select OK Wireless network SSID : Wireless type : Security type: Encryption type : Connection status : Signal strength : Connect using these settings? Yes No When you change “Wireless network” -->Press “No” See “Sets / Changes wireless network setting” on p. 41 and follow the directions on screen to complete the setting. You need to be “Connected” to use network devices. Please set Access point settings to “Connected”. 41 Advanced Using Network Wireless network (Wireless network setting) .. Sets / Changes wireless network setting Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting select OK Wireless network WPS (Wi-Fi Protected Setup using push button) Please choose connection method: WPS (Wi-Fi Protected Setup using PIN number) Search for wireless networks Manual settings * Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification .. For more details on setting of an Access point, please refer to operating manual for the Access point. Search for Wireless networks: Select an Access point from the ones searched for automatically, and configure the settings as instructed on the screen. WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons. WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point. Manual settings: Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect. .. When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN. IP address/DNS settings Select “IP/DNS setting mode” and set to “Automatic” (When IP/DNS automatic acquisition in DHCP can be used) Menu IP address/DNS settings IP setting mode IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192....