Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
(Waiting more than 30 seconds without pressing another button will also end the program mode.) The following is an example of Remote functions that can be programmed into the MULTI button. - TV Power - For turning TV ON and OFF. - VCR Power - For turning VCR ON and OFF (selected brands after programming it’s Infrared access code, if necessary). Both can be turned ON or OFF with one press of the MULTI button. POWER VCR POWER MULTI To delete entered functions - Press the Remote TV POWER and MULTI buttons simultaneously. Now you can enter from one to six different Remote functions. POWER MULTI PRESS SIMULTANEOUSLY NOTE: You can also program the MULTI button to perform most individual Remote Control button functions. Buttons which continuously perform a function as long as pressed (Volume Up/Down, Channel Up/Down, etc.) cannot be programmed. Only those buttons which perform a function when initially pressed (Power On/Off, Mute, Direct Channel Entry, etc.) can be programmed. -13- Special Functions (cont.) Cable Power Button - The cable power button on the Remote Control has been designed to operate selected brands of Cable boxes. The proper cable box infrared code must be obtained prior to use. (Please refer to Programming the Universal Remote for programming instructions.) The Remote Control TV/VCR/CABLE switch should be in the CABLE position. NOTE: The CHANNEL UP and DOWN buttons on the Remote may be used for selecting Cable Converter box channels. cable PIP (Picture in Picture) Button - This feature allows monitoring one channel while watching another when a second video source with a tuner is connected (such as a VCR) to the television. NOTE: When the Main Picture is in Video mode with no signal, the PIP will not operate properly. FF pip PIP Operation 1. Turn VCR ON and select a desired channel. 2. Place the TVA/CR/CABLE switch into TV position. 3. Press the PIP button (television must be ON). The PIP frame will appear at the position it was last displayed. The Main Picture Video Source and PIP Video Source will display on screen momentarily. Audio will be that of Main Picture. 4. Press the PIP button again to cancel PICTURE IN PICTURE feature. NOTE: For PIP Video source connection, refer to the PIP Operation Using VCR as Second Tuner section. Swap Button — Press the SWAP button (when the PIP frame is displayed) to interchange what is being viewed on the Main Picture with that of the PIP frame. VIDEO 1 PIPCH 02 Size Button — Press the SIZE button (when the PIP frame is displayed) to choose either the large or small PIP frame. PLAY SIZE Move Button — The PIP frame may be located at any corner of the Main Picture by pressing the PIP MOVE button (when the PIP frame is displayed). REW NOTE: Each time MOVE button is pressed (when the PIP frame is displayed), the PIP frame will move (counterclockwise) as illustrated. Freeze Button - press the freeze button to stop action in the Main Picture or PIP frame. TV/VCR FREEZE NOTE: Audio will be that of the Main Picture. Pressing the FREEZE button when the PIP frame is not displayed will stop action in the Main Picture and display it on the PIP frame. Pressing the FREEZE button when PIP frame is displayed will stop action in the PIP frame, press the FREEZE button again to continue action. Press the PIP button to delete PIP frame. -14 Main Menu Icons NOTE: When Auto Power On feature is activated, Timer Icon will change to an Exit Icon. ACTION OO Display and Exit Menus CH BUTTONS Highlight Desired Feature when Menu is Displayed VOL BUTTONS Selects or Adjusts Features when Menu is Displayed Located On Remote Control 1. Press 2. Press Icon. ACTION O . ^ and ^3 or to select the desired ACTION 3. Press O after selecting the desired Icon to access sub menus. ACTION 4. Press O twice to exit sub menus or press ACTION O once while the EXIT Icon is highlighted to exit Main Menu. Language Menu Selection The LANGUAGE MENU is factory set to ENGLISH. Follow the instructions to change the Language Menu to SPANISH, FRENCH, and back to ENGLISH. ACTION 1. Press O . 2. Press ^ or^ and ^3 or to highlight the Set-Up Icon. ACTION 3. Press O to display the Set-Up Menu. rSET=UBJ SETáTIME ENGLISH ESPAÑOL FRANÇAIS 4. Press ^ or^ to highlight ENGLISH, ESPAÑOL, FRANÇAIS. 5. Press <3 or to select ENGLISH, ESPAÑOL, or FRANÇAIS. ACTION 6. Press O twice to exit menus. Picture Adjustments Picture Norm Use to reset Color, Tint, Brightness, Picture, and Sharpness adjustments back to a factory preset level. ACTION 1. Press O . 2. Press ^ or ^ and^3 or^ to highlight the Picture Icon. ACTION 3. Press o to display the Picture Adjustment Menu. (PICTURE! PICTURE NORM NO COÜORMflHMMi HIÜJJ Util ooooooOpoooçioo OOOQOOOOQOODOooooooo u ill MMMMMIJI! t.I.H lit 000000 OOOOQOOOOOOD^ 4. Press ^ 0® to highlight PICTURE NORM. 5. Press ^3 or & to select “SET” to normalize Color, Tint, Brightness, Picture, and Sharpness. ACTION 6....
Dieses Handbuch ist für folgende Modelle:Fernseher - SP3229 (1.59 mb)