Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Viewing with an adult is therefore strongly recommended for children under 13. 16 ans + Programming is not suitable for children under the age of 16 - Contains frequent scenes of violence or intense violence. 18 ans + Programming restricted to adults - Contains constant violence or scenes of extreme violence. 48 SETUP Setup Select SETUP when setting your TV up for the first time. Use the CURSOR ▲ or ▼ on the remote to highlight the function desired. CURSOR MENU CURSOR I» Use CURSOR ▲ or ▼ to select the sub-menu of your choice. Menu Preference This feature will allow you to select any one of three different languages for all on-screen displays. MENU CURSOR CURSOR 6) Use CURSOR A , ► to highlight the language of your choice. Press SELECT to select the highlighted language. Press EXIT to quit menu or select MENU PREFERENCE to return to previous menu. 49 SETUP Set The Menu Background This function allows you to choose from two menu backgrounds. CURSOR || Setup= I Menu Prefer' I—Set The Language- I® English OFrancais O Español I—Set The Menu Background- I ®Shaded O Solid | ^ Move ÍSEÜ Select ~ Use CURSOR A , ► to highlight SET THE MENU BACKGROUND (shaded or solid), and press the SELECT button to select setting. Press EXIT to quit menu or CURSOR A to return to previous menu. Select SOLID for a black background (no picture can be seen behind menu screen), or select SHADED for a light background. Set The Clock The time must be adjusted before you can use the “Set Event Timer” or “TV Time Out” features. CURSOR I'M CURSOR || Setup 1 |l Set The Clock ^ A Time : Sun -- -- AM ▼ ■«►Move t Set ÍSEÜ Return Use CURSOR ▲ or ▼ to set the time and date. Press CURSOR A or ► to change position. Press EXIT to quit menu. 50 SETUP Set The Channels Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV. CURSOR ft r CURSOR ft CURSOR || Setup Set The Channels | ©Antenna_Q Cable(1)_q Cable(2) Auto Channel Scan | Start Ant A , Move 1SEU Return || Setup 1 || Set The Channels \ II Ant A \ I—Source- I ®Antenna O Cable(1) O Cable(2) Auto Channel Scan I Start Move (seU Select NOTE: If certain CATV channel's picture are poor or unable to be viewed in Cable (1) mode, select Cable (2). Use CURSOR A , ► to highlight the correct signal mode. Press the SELECT button to select highlighted signal. Press EXIT to quit MENU or select ANT A to return to previous menu. RECEPTION BAND AIR CATV 1 OR CATV 2 CATV CHANNEL Indicated on the screen VHF 2 ~ 13ch UHF 14 ~ 69ch VHF 2~13 2 ~ 13 Mid band A~1 A-5 ~ A-1 14 ~ 22 95 ~ 99 Super band J~W 23 ~ 36 Hyper band W + 1 ~ W + 28 37 ~ 64 Ultraband W + 29 ~ W + 84 65 ~ 125 Reception channels for each mode are shown at the left. Refer to your cable or TV guide for channel identification standards. 51 SETUP Auto Channel Scan This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip unused channels when using CHANNEL UP (A) or DOWN (▼). 1 Setup 1 ll Set The Channels II Ant A \l \l OAntenna ® Cable(1) O Cable(2) Auto Channel Scan Start ^ Move IselI Select || Setup Set The Channels || Ant A= -Source- I OAntenna ®Cable(1) Auto Channel Scan * Move [sel] Select CURSOR Start r Setup || Set The Channels Ant A ||Auto Channel Scan Scanning Channel Number: 66 | Cancel If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input. Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN. See CHANNEL MANAGER - SCAN to add or to erase additional channels (see page 42). 52 SETUP Set The Inputs Use this feature to give a name to any of the five video inputs. MENU CURSOR 1 Setup ^ Menu Preference >1 Set The Clock >1 II Set The Channels >1 ll Set The Inputs >1 II Set Event Timer >1 Set Closed Captions >1 1 About Your TV >1 J Move iSEL) Select CURSOR [ft r CURSOR ft CURSOR Press CURSOR ▲, ▼, A, ►, to highlight the name of the video inputs. Press the SELECT button to select desired input name. Select RESET to set video names to original factory preset condition. 53 SETUP Video 2 Auto Link Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2. CURSOR ft || Setup 1 || Set The Inputs \l llVideo2 Auto Link \| O Auto Input Signal Sensor O Remote Control Sensor ® Off J Move iSEp Select Use CURSOR ▲ or ▼, then press the SELECT button to change AUTO LINK setting. When AUTO INPUT SIGNAL SENSOR is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player. When REMOTE CONTROL SENSOR is selected, the TV will tu...