Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Curtis Mathes Dateigröße: 1.36 mb Dateiname: Unterrichtssprache:

The counter can also be useful if you want to find a specific point on a pre-recorded tape. 1 While a tape is playing, press DISPLAY twice. 00:01:41 The time counter appears. The counter displays time only for recorded sections of tape. Blank tapes or blank sections of tapes do not affect the counter display. 2 Press CLEAR to set the counter to “00:00:00.” . The TV/VCR automatically resets the counter to “00:00:00” when you eject a tape or record. 3 Press DISPLAY to remove the time counter. Using Memory Stop Memory Stop makes it easy to find a particular scene in a video tape. The TV/VCR automatically stops rewinding or fast forwarding when the memory counter reaches “00:00:00.” If you mark a desired scene as “00:00:00,” you can search for it the next time you watch the tape. 1 While playing a tape, when you reach the scene you want, press DISPLAY twice. The time counter appears. 2 Press CLEAR to reset the timer to “00:00:00.” VCR OPERATION Playing a Video Tape, continued To return to the scene you marked: 1 Press STOP. 2 Press FF or REW to return to the scene you marked. The TV/VCR stops the tapewhen the counter reaches “00:00:00.” 3 Press PLAY to view the scene you marked again. Using P.PLUS Press P.PLUS to compensate for a poor rental tape. Picture Plus : On 1 Insert a tape and press PLAY. 2 Press P.PLUS, and “Picture Plus Off” appears on the screen. Press P.PLUS again to turn to “Picture Plus On”. The Rental Picture Plus functions only when a tape is being played. . If the tape is ejected and reinserted, the Rental Plus feature will be OFF. Recording TV Programs as You Watch Recording 1 With your TV/VCR turned on, and with a tape in the unit, press SPEED. . Be sure the record safety tab is in place. For information on the record safety tab, see page 40. SP The tape speed appears in the lower left corner of the screen. 2 Press SPEED repeatedly until the speed you want (SLP, SP) appears. . SP (Standard Play) is the most common speed for recording. For more information on tape speeds, see page 40. 3 Select the television channel you want by pressing CH or CH or by using the number buttons. If you are using the number buttons to select the channel, press 0 before a single-digit channel number (for channel 5, press 0, 5). 4 Press REC on the remote control. The record indicator on the control panel illuminates and the TV/VCR begins recording. . The TV/VCR automatically stops recording when it reaches the end of the tape. . Press STOP at any time to stop recording. . Don’t change tape speeds while recording; this may cause picture distortion during playback. When you finish recording, rewind the tape and remove it from the TV/VCR. CHAPTER FOUR: VCR OPERATION VCR OPERATION Recording TV Programs as You Watch, continued Editing While Recording You can edit while recording, selecting only those scenes you want to record from the current television program. This is especially helpful if you want to record a program without commercials. 1 Be sure you have begun recording and that the record indicator light on the front panel is lit. 2 Press P./STILL to temporarily stop recording. After ten minutes in pause mode, the TV/VCR stops the tape automatically and switches to TV mode to protect the video heads. If this happens, press REC to resume recording. 3 To resume recording, press P./STILL again. Using Advanced Recording Features One-touch Recording One-touch Recording (OTR) lets you record television programs with the touch of a button. You can program the length of time (up to four hours) that you want to record. 1 Insert a video cassette tape, set the tape speed, and select the channel you want to record. . The TV/VCR won’t record if the record safety tab on the tape has been removed. For more information, see page 40. 2 Press REC on the remote control twice. Record 30M Your recording time options are: 30 minutes, 1 hour, 1 hour and 30 minutes, 2 hours, 2 hours and 30 minutes, 3 hours, or 4 hours. 26 CHAPTER FOUR: VCR OPERATION 3 Press REC on the remote control repeatedly until the time you want appears. The TV/VCR begins recording. You can increase the length of time you want to record at any time during the recording process by pressing the REC button again and choosing additional time. If you want to stop recording before the time is up, press the REC button until the OTR display shows “Stop.” The recording stops after a few seconds. You can also press STOP/EJECT on the front panel. Timer Recording You can set the timer to record up to six different programs. The timer can turn the TV/VCR on at the time you select, record for a selected length of time, and then turn off. You can record a program one time, daily (every day, Monday through Friday), or weekly (the same day every week). 1 Press MENU to display the menu. 2 Press CH until “VCR Setup” is selected. Press VOL+. . The clock must be set to the correct time and date before you program the timer. Menu Picture Time Set Setup VCR Setup Caption V-chip Move o...

Herunterladen

Geben Sie zwei Ziffern: