Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
For instructions on how to handle the touch pad, refer to page 15. The touch pad has the following two modes of operation. Work Surface Right Button Left Button Microsoft® InteHiMouse™ Wheel Mode (Setting at the time of purchase) Wheel mode operations (almost identical to the case of using the Microsoft® InteHiMouse™ for scroll, zoom, etc., operations) are possible for Microsoft® wheel function-compatible applications. Microsoft® InteHiMouse™ is a mouse-type device that, in addition to the two conventional buttons, incorporates a wheel able to rotate forwards/backwards. Scrolling Area j—Scrolling up/down For the Pan and Auto Scroll functions, the entire work surface of the touch pad can be used for scrolling. Original Mode Only scroll operation is possible for applications not compatible with the Microsoft® wheel function. Even for applications compatible with the Microsoft® wheel function, there are cases where only vertical scrolling or only horizontal scrolling is possible in this mode. Scrolling Area Scrolling up/down Possible when a check mark S is added for [Vertical]. Scrolling side-to-side Possible when a check mark S is added for [Horizontal]. Typical mouse operations use this area. When no check mark is added for [InteHiMouse Wheel mode], [Horizontal] and [Vertical] of [Scroll Configuration], the entire surface can be used for typical mouse opera- tions. When you are not sure whether an application is compatible with the Microsoft® wheel function or not, try using both modes. Furthermore, depending on the application, there are cases where scrolling may not be possible with either mode. # Changing the mode of the touch pad Select £|} from the taskbar or select [Motion] in [Start] - [Settings] - [Control Panel] -[Mouse). # To set the Microsoft® InteHiMouse™ Wheel mode Add the check mark y for [InteHiMouse Wheel mode] of [Scroll Configuration], • To set the original mode Delete the check mark for [ InteHiMouse Wheel mode] of [Scroll Configuration] and add the check mark / for [Horizontal] and/or [ Vertical]. Press |OK]. Handling theTouch Pad • Do not place any object on the work surface or press down forcefully with sharp-pointed objects (i.e. nails), hard objects or objects that can leave marks (i.e. pencils and ball point pen). • Do not allow things that could dirty the touch pad, such as oil. The cursor may not work properly in such cases. • When the touch pad becomes dirty: Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene or thinner, or disinfectant-type alcohol. Basic Operation (Wheel) Indicates an operation applicable to the Microsoft® IntelliMouse™ Wheel mode. (Original) Indicates an operation applicable to the original mode. Function Touch Pad Operation Moving the Cursor (Wheel) (Original) Move the tip of your finger lightly over the surface. Tapping/Clicking (Wheel) (Original) Double-Tapping/ (Wheel) Double-Clicking (Original) Dragging (Whëëi) (Original) While holding down the button, moving your finger on the work surface. or Two quick taps, but on the second tap leaving your Finger down (applying pressure) and moving it on the work surface. • When a check mark S is added for [use Drag Lock] * After the drag operation (above : left side), it is necessary to determine the destination (i.e., location of drop) by one tap. Under the condition no destination is selected, do not use the suspend or hibernation function. Nothing is shown on the display, even after resuming from the suspend or hibernation mode. In this case, the display will return after a tap or click is made. * In [Startj - [Settings] - [Control Pane!] - [Mouse] - [Tap and Buttons] Scroll* Scroll a document (rotate the wheel) (Wheel) (Original) (Wheel) (Original) Auto Scroll* (Wheel) Automatically scroll a document (move the mouse after clicking the wheel) Operate after pressing the two buttons simultaneously. • When releasing the auto scroll function: One tap on the work surface. The illustrations shown may differ from the actual physical appearances. Starting Up/Shutting Down Function Touch Pad Operation Pan* (wüD Scroll in various directions of a document (move the mouse slightly while holding down the wheel) Operate while holding down the two buttons. Zoom* (Wheel) Magnify/reduce the display of a document. (rotate the wheel while holding down ( Ctrl ) ) --, Magnify L-H1J + .