Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Anleitung JVC, modell HD-52G586

Hersteller: JVC
Dateigröße: 1.67 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Step 2 – Connecting Your Devices Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV. A VCR is not necessary for operation of the television. If you follow these diagrams and the television does not work properly, contact your local cable operator. • To connect a DVD player, see Diagram #3. A DVD player is optional. • If you have a satellite television system, please refer to the satellite TV manual. Do you use a Cable TV Box? Do you have a VCR? Yes Do you have a VCR? No Yes No Yes No Diagram #2 Diagram #1 Diagram #3 Diagram #1 13 Quick Setup Connections Quick Setup Connections Diagram #1 Cable or Antenna Output 75. (VHF/UHF) TV Rear Panel Coaxial Cable Cable Box OUT IN OR Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV. Diagram #2 Cable or Antenna Notes: • If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the LEFT AUDIO INPUT on the front of the TV. • Use the S-Video connection if possible for superior picture quality. • Your VCR must be turned on to view premium cable channels. 75. (VHF/UHF) Y Pb Pr S-VIDEO INPUT-3 INPUT-1 VIDEO I AUDIO I L I AUDIO I R VIDEO OVEROVER S-VIDEO TV Rear Panel Output Cable Box OUT IN VCR IN OUT Two-Way Splitter INOUT OUT IN OUT R L V OR Coaxial Cable 14 Quick Setup Connections Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • You may also connect the DVD player to Input 1. Diagram #3 75. (VHF/UHF) Y Pb Pr INPUT-1 VIDEO L I AUDIO I R OVER S-VIDEO Pr INPUT-2 VIDEO L R AUDIO TV Rear Panel DVD Player (OPTIONAL) Cable or Antenna Output Coaxial Cable VCR Two-Way Splitter IN OUT R L V IN OUT Y PB PR OUT AUDIO OUT R L OR IN OUT OUT Green Blue Red 15 Quick Setup Connections Quick Setup Connections Connecting to JVC AV Compu Link JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input. • The AV CompuLink cable may be included with the JVC AV CompuLink unit you wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or for part # EWP 805-012. • AV CompuLink can only be used with JVC brand products. To Connect: Plug one end of the AV CompuLink cable AV CompuLink Cable into the AV COMPULINK INPUT on your VCR, DVD, or other CompuLink device. Plug the other end of the AV CompuLink cable into the AV COMPULINK at the rear of the television. Note: • The AV CompuLink cable has a male 3.5 mm (mono) plug on each end. AV COMPULINK - III VIDEO (DIGITAL) AUDIO (DIGITAL) AV CompuLink IN OUT V L R IN OUT VCR TV Rear Panel Notes: • In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s PLAY button. • If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s instruction book), using VCR A code will switch the TV to input 1. • Refer to your DVD instruction book for detailed connection information. • To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the receiver connection instructions for detailed connection information. • AV CompuLink is compatible with select AV CompuLink receivers. 16 Quick Setup Connections Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the side input jacks (Input 4) located on the side of the television. You can also connect these using the television’s rear input jacks, using the same instructions. VOLUME INPUT 4 CHANNEL OPERATE + – + – MENU OVER S-VIDEO VIDEO L/MONO R AUDIO INPUT CAMCORDER- OR - 1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder. 2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on the side of the TV. 3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the side of the TV. Note: • If your camcorder is a mono sound model it will...

Dieses Handbuch ist für folgende Modelle:
Fernseher - HD-52G566 (1.67 mb)
Fernseher - HD-52G576 (1.67 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien