Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: JVC Dateigröße: 1.67 mb Dateiname: c154ade3-eb70-41a2-805e-d89927f86ea5.pdf Unterrichtssprache:

Notes: • The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 28. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 29. VCR Buttons You can use this remote control to operate the basic functions of your VCR. These functions include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and power off. Move the selector switch to VCR to operate. • The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 28. DVD Buttons You can also use this remote control to operate the basic functions of your DVD player. These functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off. Move the selector switch to DVD to operate. • The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 29. Light Your remote control includes illuminated buttons for key features like CHANNEL +/- and VOLUME +/-. Press the LIGHT button to turn the illumination on for 5 seconds. 66 OSD Information No ProgramOSD Information No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen. It moves automatically every two seconds. Note: • Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off functions that you set, are still active. Invalid Signal If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It appears when the input is PC and it is a single screen. 67 Troubleshooting PROBLEMS CHECK Troubleshooting PROBLEMS CHECK There is no power • See if the power cord became unplugged. • Check for a blown fuse or circuit breaker or a power outage. • It is possible the fan is stuck or the inside temperature is rising abnormally. Consult your dealer. The POWER LED • It may be a malfunction that the fan is locked or the temperature has increased. and LAMP LED are blinking alternately. The POWER LED • The lamp may not have been installed correctly, or it may be due to a malfunction. and LAMP LED are • The lamp door may not be closed correctly. blinking rapidly simultaneously. There is no picture • The antenna could be disconnected. or sound • The input mode could be set improperly. See page 60. • The tuner (Auto Tuner Setup) could be set improperly. See page 34. • The TV station may be having difficulties. Check to see if other stations are working. Remote control is not • Check to see that the batteries are still working and properly installed. operating properly or • Make sure the remote has a clear sight path to the TV. at all • Check that the TV/CATV switch is in the proper position. • You may be too far from the TV. You must be within 23 feet (7 meters). You cannot select a • Make sure the channels have been programmed. See "Channel Summary", page 34. certain channel • Check to see if the channel is locked. See "Channel Summary - Lock" page 35. The power turns off • Make sure the set did not become unplugged. by itself • Perhaps the On/Off Timer is set. See page 56. • Check to see if the Sleep Timer was set. See page 62. It does not operate • This television is operated by a microprocessor. It is possible that external noise orcorrectly interference is causing the problem. If the television does not function correctly, remove the electrical plug from the wall outlet and wait a while before inserting it into the wall outlet again and operating the television. The clock is wrong • The power was interrupted and the clock was not reset. See page 55. The color quality • Tint and Color may be improperly adjusted. See page 51. is poor • The Video Status mode may be turned to the wrong setting. See page 62. There are lines • There could be interference from another electrical appliance, such as a computer, across the picture another TV or VCR. Move any such appliances further away from the TV. • There could be interference from a high-wattage appliance, like a hairdryer or vacuum, operating nearby. Move the antenna away from the appliance or change to a coaxial cable connection which is less prone to interference. The picture is spotted There are double • A building or passing airplane can reflect the original signal and produce a second, pictures (ghosts) slightly delayed one. Adjust your antenna position. Picture is snowy • Your antenna may be damaged, disconnected or turned. Check the antenna (image noise) connection. If the antenna is damaged, replace it. Screen is 80% ...

Herunterladen

Geben Sie zwei Ziffern: