Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Daewoo Dateigröße: 6.92 mb Dateiname: Unterrichtssprache:

2. The only source of X-RAY Radiation in this TV receiver is the picture tube. For continued X-RAY RADIATION protection, the replacement tube must be exactly the same type tube as specified in the parts list. SAFETY PRECAUTION Potentials of high voltage are present when this receiver is operating. Operation of the receiver outside the cabinet or with the back board removed involves a shock hazard from the receiver. Servicing should not be attempted by anyone who is not thoroughly familiar with the precautions necessary when working on high voltage equipment. Discharge the high potential of the picture tube before handling the tube. The picture tube is highly evacuated and if broken, glass fragments will be violently expelled. If any Fuse in this TV receiver is blown, replace it with the FUSE specified in the Replacement Parts List. When replacing a high wattage resistor (metal oxide film resistor) in the circuit board, keep the resistor 10 mm away from circuit board. Keep wires away from high voltage or high temperature components. This receiver must operate under AC 230 volts, 50 Hz. NEVER connect to a DC supply or any other voltage or frequency. PRODUCT SAFETY NOTICE Many electrical and mechanical parts in this equipment have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the X-RAY RADIATION protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements, electrical components having such features are identified by designated symbol on the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitutes replacement parts which do not have the same safety characteristics as specified in the parts list may create X-RAY Radiation. DTV R&D Europe CP-520/520A/520F Service Manual 3 ALIGNMENT INSTRUCTIONS 3.1 MICROCONTROLLER CONFIGURATION : SERVICE MODE To switch the TV set into service mode please see instruction below. 1 - Select PR. number 91 2 - Adjust sharpness to minimum and exit all menus. 3 – Within 2 seconds press the key sequence : RED - GREEN - menu The software version is displayed beside the word Service, e.g. “SERVICE VER 00.05”. To exit SERVICE menu press menu key or Std By key. 3.2 SERVICE MODE NAVIGATION Pr Up/Down remote keys : cycle through the service items available. Vol -/+ remote keys : Dec./Increment the values within range – Cycle trough option bits. OK key : Toggle bits in option byte Order Item Default setting 1 HOR CEN 2 RED GAIN 3 GRN GAIN 4 BLUE GAIN 5 RED BIAS 6 GRN BIAS 7 AGC LEVEL 8 G2 – SCREEN 9 OPTION1 10 OPTION2 11 AVL 12 PARABOLA 13 HOR WIDTH 14 CORNER T 15 CORNER B 16 HOR. PARAL 17 V. LINEAR 18 V. SLOPE 19 EW TRAPEZ 20 S CORRECT 21 VERT CENT 22 VERT SIZE 3.3 MICROCONTROLLER CONFIGURATION : O...

Herunterladen

Geben Sie zwei Ziffern: