Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Daewoo Dateigröße: 2.85 mb Dateiname: Unterrichtssprache:

-When pressing ” ” button on the TV set, screen changes as follows: TV DVB AV1 AV2 AV3(S-Video) PC HDMI 1 HDMI 2 Component TV 1. Pressing the “AV” button on the remote control. • The screen changes as follows: AV1 AV2 AV3/S-Video AV1 POWER MULTI MEDIA MUTE DVB/Analog AV NORMAL VOL PR / PAGE OK / SELECT PR 19 – – – – – AV1 Clock 1 2 0 0 PR 19 – – – – – AV2 Clock 1 2 0 0 PR 19 – – – – – AV3 Clock 1 2 0 0 Note : Cautions in menu setup • Don’t connect the composite video signal to AV3 and S-video signal to the S-video input at the same time. If connecting both signals at the same time, the S-video takes precedence. • If sound signal is mono only, connect it to the L-terminal of the sound input terminal. 32 Selection of AV and Multimedia Input Signal Selection of AV and Multimedia Input Signal When connecting PC, STB, DVD with Multimedia 1. Pressing the “MULTIMEDIA” button on the remote control. • The screen changes as follows: PC HDMI 1 HDMI 2 Component PC POWER MULTI MEDIA MUTE DVB/Analog AV NORMAL VOL PR / PAGE OK / PC Clock 1 2 0 0 HDMI 1 Clock 1 2 0 0 COMPONENT Clock 1 2 0 0 HDMI 2 Clock 1 2 0 0 HDMI & PC mode 1. For optimum picture quality, use 1360 x 768 resolution on 100Hz TV model, 1920 x 1080P on FULL HD TV model computer or set top box output at a 60Hz refresh rate. Using other formats or refresh rates may result in reduced picture quality. 2.If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia Input table. Note : • 1280 x 720 mode is commonly used for Component. • So if this mode is used in PC mode, the screen can be enlarged. 33 POWER MULTI MEDIA MUTE DVB/Analog AV NORMAL VOL PR / PAGE OK / SELECT Screen Adjustment Mode Normal Mode Movie Mode Dynamic Mode Favourite When setting up various screen modes -The user may select various screens designed for a good picture without adjusting the brightness, contrast or col- our individually. 1. Pressing the “NORMAL” button. • The screen changes as follows: Normal Movie Dynamic Favourite Normal • The screen adjustment status changes as the following screens are displayed sequentially whenever pressing the “NORMAL” button. • The screen returns to the mode prior to turning the power off when you power on again. Note : • Normal : For a highly defined image in a normally bright room. • Movie : Ideal for movies. • Dynamic : For a clear-cut image emphasising high contrast for sports viewing. • Favourite : Allows the user to customise settings as desired. POWER MULTI MEDIA MUTE DVB/Analog AV NORMAL VOL PR / PAGE OK / SELECT Screen Adjustment Mode Normal Mode Movie Mode Dynamic Mode Favourite When setting up various screen modes -The user may select various screens designed for a good picture without adjusting the brightness, contrast or col- our individually. 1. Pressing the “NORMAL” button. • The screen changes as follows: Normal Movie Dynamic Favourite Normal • The screen adjustment status changes as the following screens are displayed sequentially whenever pressing the “NORMAL” button. • The screen returns to the mode prior to turning the power off when you power on again. Note : • Normal : For a highly defined image in a normally bright room. • Movie : Ideal for movies. • Dynamic : For a clear-cut image emphasising high contrast for sports viewing. • Favourite : Allows the user to customise settings as desired. 34 Screen Adjustment Screen Adjustment When adjusting the screen to taste -You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. 1. Select “PICTURE” by pressing the “MENU” button. • The menu screen appears as follows. VOL PR / PAGE VOL PR / PAGE OK / SELECT Mode Dynamic Brightness 41 Contrast 51 Colour 31 Sharpness 31 Tint R G 0 Colour Temp Normal Position Access Exit Picture Screen Sound Function Install DVB 2. Select and adjust each item. • Move to the Picture menu. • Whenever pressing the ” /” button, you can select in order Brightness, Contrast, Colour, Sharpness and Colour Temp. • The screen appears, as on the right, if pressing the ”/” buttons after selecting items desired to adjust with the ” /” buttons. • You can adjust all items by pressing the ”/” button. Brightness 31 Mode Dynamic Brightness 41 Contrast 51 Colour 31 Sharpness 31 Tint R G 0 Colour Temp Normal Position Access Exit Picture Screen Sound Function Install DVB Note : • Brightness : Adjusts the whole of screen brighter or darker. • Contrast : Adjusts difference between brightness and darkness between objects and background on the screen. • Colour : Adjusts colour saturation. • Sharpness : Adjusts outline of the screen smoothly or sharply. • Colour Temp : Changes the tone of colour: Normal : Normal white Warm : Reddish white Cool : Bluish white • Tint only active when receiving a NTSC signal. • The adjusted levels are stored automatically in Favourite mode. 35 Screen Adjustment Screen Adjustment Adjustment of Screen Size in TV and AV mode CANCEL / EXIT MEN...

Herunterladen

Geben Sie zwei Ziffern: