Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Table of Content P.1 2. Read Before Installation P.2 3. Introduction P.3 4. Features P.3 5. Package Contents P.4 6. Optional Accessories P.5 7. Peripheral Products P.5 8. Important Safeguards P.6 9. Structure Diagram P.7 10. Dimension Diagram NVP1015-S8/1601 P.8 NVP1017-S8/1601 P.9 10. LCD Session LCD Membrane Diagram P.11 LCD OSD Control Main Menu P.11 Sub Menu P.12-13 Resolution Settings For Windows P.14 11. KVM Session Front View P. 16 Rear View P. 17 Installation Steps P.18 Cascading P. 19 12. Start Up P. 20 HotKey Command P. 20 HotKey Command Operation P. 21-22 KVM OSD Operation Main Controls P. 23 Sub Controls P. 24-29 13. FAQ P. 30 14. Technical Specification P. 31-32 1 i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: NVP1015/NVP1017UserManualNVP1015/NVP1017UserManual 2. Read Before Installation Technical Notes For Windows 98/98 SE systems • HID (Human Interface Device) driver must be installed prior to using the USB KVM switch. To install the HID driver, first connect a USB keyboard and mice directly to computer (before installing KVM switch) then follow the Windows installation instructions, this will install the HID device driver and allow the use of the KVM switch. Note : Failure to do so may result in Windows not being able to detect keyboard and mouse. • If a mouse recognition error is displayed during system boot: “Windows did not detect a mouse attached to the computer.You can safely attach a serial mouse now. To attach a mouse to a PS/2 mouse port, you must first turn the computer off” a) Press the Tab key once to select the check box. b) Press the Space bar once which will place a check in the box “Do not show this message again” c) Press the Enter key once and Windows will continue to boot and will then recognize the mouse. Operating System Compatibility • Any USB-enabled operating system such as Windows® 98, Windows® 98SE, Windows® 2000, Windows® XP or higher. • Windows® 95 are not recommended because of immature USB support. 2 i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: NVP1015/NVP1017UserManualNVP1015/NVP1017UserManual 3. Introduction NVP Series is a combination of keyboard, mouse and monitor into a drawer, with features such as flip-up design, adjustable brackets, built in LCD OSD to provide effective assistant for an administrator to control PC system. NVP Series provides cost effective for your limited IT budget over using CRT and rack mounting. Also, it will be space saving for your compact environment rack and effective assistant for an administrator to control PC system. 4. Features • Adjustable mounting brackets from 390 to 790mm (front to rear 19” mount) • Lightweight aluminium construction—with black anodise finish • Slim Size keyboard with GlidePoint TM touch pad mouse • Standard D-Sub 15-pin VGA input connector • Supplied with 12V 5A remote power adapter (single power resource) • Directly compatible with SUN Microsystems resolution 1152 x 900 • Built-in SUN Microsystems Hot Key without any converter • Built in On Screen Display controlled by integral membrane switches. • Unique mechanical design to maximize rack mountable space • Unique monitor flip-up design allows viewing through closed glass door of cabinet. • Built-in KVM switch function for easy controlling and monitoring up to 16 residing servers / platforms • Auto scan mode for monitoring PCs and flexible scan time from 5 ~ 99 seconds • Hot Pluggable—Add or remove computers without powering down the switch • Easily switch Individual button to select the PC channel using the pushbutton channel selector switches, Hot Keys, or via the On-Screen Display (OSD) Menu Disclaimer This information is subject to change without notice. The producer of this manual accepts no responsibility for damage or claims, resulting from misuse or misinterpretation 3 i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: NVP1015/NVP1017UserManualNVP1015/NVP1017UserManual 5. Package Contents LCD Monitor Drawer with USB KVM Switch 1 Piece User Manual 1 Piece DC Power Adapter 1 Piece Power Cord 1 Piece Mounting Bracket 1 Pair Fasteners 4 Pieces NB-6 2-in-1 KVM cable 8 Pieces Before Unpacking It is very important to locate the LCD Keyboard Drawer in a suitable environment. • The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable cabinet. • Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. • Convenience for connecting the LCD Keyboard Drawer to the related facilities should be well considers too. Unpacking The LCD Keyboard Drawer comes with the standard parts shown as above. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately. 4 i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL:...
Dieses Handbuch ist für folgende Modelle:Fernseher - NVP1017 (2.53 mb)