Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Quasar Dateigröße: 2.5 mb Dateiname: Unterrichtssprache:

• Set POWER button to ON. Monitor Correction No picture or sound... Poor picture with normal sound... Poor sound with normal picture... Poor TV reception... No color or poor color... Ghost (multiple) images... TV programs cannot be watched... Channel cannot be selected... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 8) • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. • Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP TV menu. (P. 15) • Adjust VOLUME control. (P. 14) • Adjust SHARPNESS and PICTURE controls in the SET UP TV menu. (P. 15) • Adjust TINT and COLOR controls in the SET UP TV menu. (P. 15) • Install a directional antenna. • Make sure the selected channel is in unit's memory. (P. 10, 11) • Only the channel being recorded can be viewed on this unit. VCR Correction TV program cannot be recorded... Timer recording cannot be performed... No playback picture, or the playback picture is noisy or contains streaks... VCR cannot be controlled... • Make sure your antenna system (TV or CABLE), is correctly set. (P. 8) • Make sure cassette record tab is intact. (P.3) • Check that clock is set to current time and date. • Make sure DSS/CABLE box (if used) is left on and tuned to channel to be recorded. • Set recording Start/Stop times correctly. (P. 20-21) • Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer recording even after power is restored. • Adjust TRACKING control in either direction. (P. 4) • Try Head Cleaning. (P. 4) • Make sure VCR LOCK is set to off. (P. 25) • Make sure unit is not in a Timer Record operation. Remote Control Correction Unit cannot be controlled... ACTION, PROG and FM/TV buttons cannot be selected... • Aim remote at remote sensor on unit (P. 7) so that signal is unobstructed. • Inspect the remote batteries. (P. 3) • Make sure VCR LOCK is set to off. (P. 25) • Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference. • Check remote batteries. Miscellaneous Correction Video cassette cannot be inserted... Video cassette cannot be removed... Tape cannot be ejected or inserted... Video cassette ejects when a recording is started, or the power is turned off for timer recording... In Stop mode, the VCR motor (CYLINDER) continues to rotate... VCR cannot be controlled... • Insert the cassette window side up; record tab facing you. • Completely insert Power Plug into an AC outlet. • Try ejecting or inserting the tape again after turning POWER off, then back on. • Make sure cassette record tab is intact. (P. 3) • To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. • Make sure VCR LOCK is set to off. (P. 25) If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262). To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com. 31 For Your Information Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic/Quasar Video Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor’) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Product Parts Labor Service Contact Number Camcorder One (1) Year (except CCD Image Sensor) CCD Image Sensor - 6 (Six) Months Ninety (90) Days Ninety (90) Days Carry-In or Mail-In 1-800-211-PANA(7262) DVD/VCR Deck, A/V Mixer One (1) Year Ninety (90) Days Carry-In or Mail-In 1-800-211-PANA(7262) TV/VCR, TV/DVD, TV/DVD/VCR Combination One (1) Year (except CRT) CRT - Two (2) Years Ninety (90) Days Ninety (90) Days Carry-In: 21" CRT and Smaller In-Home or Carry-In: 22" CRT and Larger 1-800-211-PANA(7262) TV/HDR Combination One (1) Year (except CRT) CRT - Two (2) Years Ninety (90) Days Ninety (90) Days In-Home or Carry-In 1-888-843-9788 Rechargeable Batteries (in exchange for defective item) Ten (10) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262) Tape (in exchange for defective item) Five (5) Days Not Applicable Carry-In or Mail-In 1-800-211-PANA(7262) Memory Cards (in exchange for...

Herunterladen

Geben Sie zwei Ziffern: