Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
• Text—An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). To view captions or text: 1. Tune the TV to the desired program. 2. Press MENU, and then press x or • until the CUSTOM menu appears. 3. Press z or y to highlight CC. MENU yzx • 4. Press x or • to highlight the desired closed caption mode, as follows: • To view captions, highlight C1, C2, C3, or C4 (C1 displays translation of the primary language in your area). Note: If the program or video you selected is not closed captioned, no captions will display on-screen. CUSTOM T I MER CC C1 / C2 / C3 / C4 / T1 / T2 / T3 / T4 / FAVOR I CH OFF 1TE FAVOR I CH2 TE V BACKGROUND I DEO CH LABEL LABEL ING 000 1 2 3 4 5 6 7 8 9 ENT100 0 CH VOL POWER TIMER RECALL TV/VIDEOMUTE TV CABLE VCR CH RTN PICSIZE EXIT LIGHT ADV/ PIP CH ADV/ PIP CH FAV FAV FAVORITE MENU/ STROBE ENTER Note: A closed caption signal may not display in the following situations: • when a videotape has been dubbed • when the signal reception is weak • when the signal reception is nonstandard • To view text, highlight T1, T2, T3, or T4. Note: If text is not available in your area, a black rectangle may appear on-screen. If this happens, turn off the Closed Caption feature. WORLD WEATHER Temps Current F C Weather LONDON 51 11 MOSCOW PARIS ROME TOKYO 57 14 53 12 66 19 65 18 Cloudy Clear Cloudy Rain Clear To turn off the Closed Caption feature: Highlight OFF in step 4. Using the TV’s Features 40 Setting the sleep timer To set the sleep timer to turn off the TV automatically: 1. Press TIMER to set the length of time until the TV turns off. Note : * To display the amount of time left until the TV turns off automatically, press TIMER once. T I MER 6 0 Every time you press TIMER, the time display will increase by 10 minutes, up to 180 minutes. 10 > 20 170 > 180 > 0 > 10 MIN. 1 2 3 4 5 6 7 8 9 ENT100 0 CH VOLCH RTN POWER TIMERTV/VIDEOMUTE RECALL TV CABLE VCR PIC SIZE EXIT LIGHT ADV/ PIP CH ADV/ PIP CH FAV FAV FAVORITE MENU/ STROBE ENTER POWER To cancel the sleep timer: RECALL Press TIMER until it is set to 0. TIMER The timer can also be set using the on-screen menu: 1. Press MENU, and then press x or • until the SETUP menu appears. Channel 2. Press y or z to highlight TIMER. Numbers 3. After the number position starts to blink, press the Channel Number buttons (0–9) to enter the length of time until the TV turns off automatically. MENU/ENTER 4. Press ENTER to start the timer. yzx • EXIT Setting the clock To set the clock: 1. Press MENU, and then press x or • until the SET UP menu appears. Note : If the TV’s power source is interrupted (the power cord is unplugged or a power failure 2. Press y or z to highlight CLOCK SET. 3. After the number position starts to blink, press the Channel occurs), the clock must be reset. Number buttons (0-9) to enter the correct time. The clock operates on a 12-hour cycle. 4. Press ENTER to start the clock. CUSTOM T I MER CC C1 120 FAVOR I CH1 TE FAVOR I CH2 TE V BACKGROUND I DEO CH LABEL LABEL ING SET UP LANGUAGE CLOCK ANT ADD ADDERASE/ TV CH PROGRAM CABLE/ CABLE 1 ANT 09 2 5 : 1/2 SET ENGL SHI To display the time on-screen: Press RECALL. 41 IntroductionConnectingyour TV Using theRemote Control Setting upyour TV Using the TV’s Features AppendixIndex Using the TV’s Features Using the TV’s Features Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Every time MUTE is pressed, the mute mode will change in the following order. > Normal > 1/2 MUTE > MUTE When you select “MUTE” mode, the closed caption feature is automatically activated. To deactivate this feature, press MUTE again. This feature works only when the closed caption mode is set to OFF. See “Using the closed caption feature” on page 40 for more information. Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while watching TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time the TV is turned on, the channel is changed, or the RECALL button is pressed. The MTS feature is not available when the TV is in VIDEO mode. To listen to stereo sound: 1. Press MENU, and then press x or • until the AUDIO menu appears. 2. Press y or z to highlight MTS. 3. Press x or • to highlight STEREO. AUD OI MTS BASS STEREO SAP MONO/ / 50 50 0 TREBLE BALANCE RESET You can leave the TV in STEREO mode because it will automatically output the type of sound being broadcast (stereo or monaural). The word “STEREO” or “SAP” displays in yellow in the menu when the TV receives the signal. If the stereo sound is noisy, select MONO to reduce the noise. To listen to SAP (if...