Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Start your copy by pressing the appropriate Start Copy button. You are copying onto transparency or glossy paper types. When you are copying onto transparencies and glossy papers, the copying process slows down to allow the ink to dry. You turned off the HP Color Copier 210 when you were not using it. The scanner bulb shuts off if it remains idle for 12 hours. It must warm up the first time it is used. To shorten the warm-up time, leave the product turned on. 6-8 6-86-86-86-8Troubleshooting and Maintenance 6-8 Copies are faded or colors are dull Copies are faded or colors are dullCopies are faded or colors are dullCopies are faded or colors are dullCopies are faded or colors are dullCopies are faded or colors are dull Possible Causes Solutions Incorrect paper-type setting. Make sure that the paper type selected on the front panel display reflects the type of paper actually loaded in your HP Color Copier 210. Light colors print as white. Turn on ELC (Enhance Light Colors) on the front panel display by pressing the Menu button repeatedly until ELC appears. Press the Plus (+) button to turn on ELC. The dot becomes solid. Press the Select/Resume button, then press the Color Start Copy button to make a copy. The lamp is too dim. If Scanner bulb failing appears on the front panel display, the lamp needs to be replaced. Refer to the section “HP Customer Support,” later in this chapter, for information on getting customer service. The glass is dirty. Clean the glass and underside of the document cover with a soft, damp cloth. The Color Intensity setting is too low. Press the Color Intensity button. Press the Plus (+) button to intensify the color and make your copy more vivid. The dot moves to the right. Press the Select/Resume button, and then press the appropriate Start Copy button. The Lighter/Darker setting is too low. Press the Lighter/Darker button. Press the Plus (+) button to darken your copy. The dot moves to the right. Press the Select/Resume button, and then press the appropriate Start Copy button. HP Color Copier 210/210LX User’s Guide 6-9 6-96-96-96-96-9 Paper wrinkles and is very wet Paper wrinkles and is very wetPaper wrinkles and is very wetPaper wrinkles and is very wetPaper wrinkles and is very wetPaper wrinkles and is very wet Possible Causes Solutions You are copying a page with very dark colors. Press the Lighter/Darker button. To lighten your copy, press the Minus (–) button. The dot moves to the left. Press the Select/Resume button, and then press the appropriate Start Copy button. You can also press the Color Intensity button to lighten your copy. Press the Minus (–) button to minimize the color intensity and make your copy more pale. The dot moves to the left. Press the Select/Resume button, and then press the appropriate Start Copy button. Ink bleeds on the paper or the print seems fuzzy. The paper becomes excessively wrinkled. You might be using the wrong paper. Use paper supported and recommended by HP. You might be copying on the wrong side of the paper. Verify you have loaded paper with the print side down in the paper tray. You might be copying on plain paper in Glossy or Transparency mode. Press the Paper Type button until Plain Paper appears in the display, and then press Select/Resume. You might not be copying within the specified environmental conditions. Move the copier to a room where you can better control the humidity. 6-10 6-106-106-106-106-10 Troubleshooting and Maintenance Copy quality is poor Copy quality is poorCopy quality is poorCopy quality is poorCopy quality is poorCopy quality is poor Possible Causes Solutions Print cartridges need to be replaced or the nozzles are clogged. Print a self-test page by pressing the Menu button until Self Test Page appears on the display. Press the Select/Resume button to print the self test page. If any of the colored bars are missing (cyan, magenta, yellow, or black), the appropriate print cartridge must be replaced. If the page streaks or white lines appear in any of the colored bars, the cartridges need to be cleared. The original is of poor quality. Moire patterns, such as bands, checks or stripes in the picture after it is copied, are caused by copying a picture of poor quality, such as a newspaper photo. To reduce moire patterns, try placing one or more clear plastic sheet protectors directly on the glass, and then place the original face down on top of the plastic sheet. You can also try reducing the copy by 3%. To reduce or enlarge copies in 1% increments, press and hold down the Reduce/Enlarge button and press the Plus (+) and Minus (–) buttons. To confirm the setting, press Select/Resume. Copy quality is set to Fast. Press the Copy Quality button until the light is next to Normal or Best. HP Color Copier 210/210LX User’s Guide 6-11 6-116-116-116-116-11 Repetitive patterns are visible on the copy Repetitive patterns are visible on the copyRepetitive patterns are visible on the copyRepetitive patterns are visible on the copyRep...