Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Words that are sung Press CAP/TEXT on the remote control to switch between normal TV usually appear enclosed by musical notes. and the two closed caption modes (captions and 1/2 of full screen Text). Text: When available, the Text mode will fill part of the screen with a Captions: This closed caption mode will display text on the screen in programming schedule or other information. After selecting a closed English or another language (depending on the setting of Closed caption mode, it will stay in effect until it is changed, even if the Captions 1/2). Generally, closed captions in English are transmitted channel is changed. If the captions signal is lost due to a commercial on captions channel 1 and closed captions in other languages are or a break in the signal, the captions will reappear when the signal is transmitted on captions channel 2. received again. If the channels are changed, the captions will be delayed approximately 10 seconds. For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol (CC). • When activating the closed captioned decoder, there will be a short delay before the closed captioned text appears on the screen. • Closed captioned text is only displayed in locations where it is available. • If no caption signal is received, no captions will appear, but the television will remain in the caption mode. • Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing. • When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed captions. • Some cable systems and copy protection systems may interfere with the closed captioned signal. • If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna. SETTING THE V-CHIP The V-Chip function is available only for the U. S. V-Chip system. The Canadian V-Chip system is not supported. This TV is fitted with a V-CHIP controller that provides you with channel viewing access controls and restrictions. This function is to prevent your children from watching violent or sexual scenes that you may choose to exclude. Press MENU and then SET + or – until the indicator next TV RATING 1 to “V-CHIP SET” begins to flash, then press ENTER. SET – SET + 2 Enter your password (4 digits) using the Direct channel OFF TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA selection buttons (0–9). In the event of entering an incorrect password press RESET. Then press ENTER. TV-Y: All children TV-PG: Parental guidance 3 4 TV-Y7: 7 years old and above TV-14: 14 years old and aboveEnter the password again, and then press ENTER. TV-G: Children's program TV-MA: 17 years old and above When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to Press SET + or – until the indicator next to “V-CHIP” explain the rating. begins to flash. Press SET + or – to select the desired rating you want. Press ENTER to Press ENTER to select ON. select the setting ON or OFF. 5 Press SET + or – until the indicator next to “TV RATING” or MPAA RATING “MPAA RATING” begins to flash. Press ENTER. SET – SET + 6 Press SET + or – to select the desired rating for the OFF G PG PG-13 R NC-17 X applicable video or TV channel. Press ENTER. 7 Press MENU repeatedly until the menu screen is cleared. G: All ages R: Under 17 years old parental PG: Parental guidance guidance suggested PG-13: Parental guidance less NC-17: 17 years old and above than 13 years old X: Adult only NOTES: • V-Chip function is based on specifications for the United States and therefore may not work properly in Canada. • If you want to change your password, follow steps 1 and 2 and select “CHANGE PASSWORD” option. Then enter your new password. • The V-Chip function is activated only on programs and tapes that have the rating signal. • Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the show. When the program starts, the “INPUT PASSWORD” will appear on the screen. When you want to release the V-Chip temporarily, enter the password. If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original setting will be resumed. If you return to the channel you were watching you must re-enter your password to temporarily release your V-Chip function again. • When you watch the TV using a cable box or a VCR and the TV is tuned to channel 3 or 4, you must release the V-Chip temporarily. The V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case. • When changing the channel with the cable box or the VCR, approximat...