Stimmen - 6, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Registering your purchase is an essential step to guarantee you’ll receive all of the benefits you’re entitled to as a PHILIPS MAGNAVOX product owner. Complete and mail your Owner’s Registration Card today to ensure your right to warranty verification, owner confirmation, model registration, plus a wide variety of special services and savings. Know These Safety Symbols. This “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical shock. For the safety of everyone in your household, please do not remove the product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. Read Operating Instructions Carefully. The information in this manual can help you take full advantage of your product’s many features, and ensure years of safe, reliable operation. So don’t miss out. Read the enclosed instructions, safety tips, and warranty information today. INTRODUCTION Congratulations on the purchase of your new Color TV. The best way to familiarize yourself with your set is to read the operating instructions carefully. They will explain the operations and features of your set, the warranty, and safety procedures. Positioning the TV To obtain a picture with good contrast, position your TV in such a way that no direct sunlight strikes the screen. Ventilation To prevent overheating, do not cover the ventilation holes on the TV. Never place your TV close to a heat source. The Model and Serial Numbers are on the back of this TV. Please record these numbers and the purchase date in the spaces below. Refer to them whenever you ask your dealer about this TV. Model No. Purchase Date Serial No. ATTENTION : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, The exclamation point within an equilateral triwithin an equilateral triangle, is intended to alert angle is intended to alert the user to the presthe user to the presence of uninsulated “dan-ence of important operating and maintenance gerous voltage” within the product’s enclosure (servicing) instructions in the literature accomthat may be of sufficient magnitude to consti-panying the appliance. tute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. – 1 – CONTROLS Display Button DISPLAY CHANNELAC^DCCOMPACTCOLORTV VOLUME VHF UHF CH. CH. 2 4 6 7 9 11 13 14 20 30 40 50 60 70 83 V U POWER PHONE Volume Buttons Channel Buttons Indoor Rod Antenna Phone Jack Channel Scales TV Band Select Button (UHF, VHF) REAR Power Button TV/Video Selector Audio/Video Input Jacks TV External Antenna INPUT TV VIDEO VIDEO AUDIO EXT.ANT. TINT COLOR CONTR BRIGHT DC 12 – 15V Tint Control Color Control Bright Control Contrast Control External Power (Ext. Ant.) Jack (DC 12–15V) Jack – 2 – TV ANTENNA Indoor Antenna Hookup Your TV has a rod antenna. 1. Extend the antenna and rotate it until you get the best TV picture. VHF/UHF Outdoor Antenna Hookup * Shorten the rod antenna, then lower the rod antenna into place on top of the TV. 1. If the outdoor antenna has flat twin lead (300 ohm) wire, connect the ends of this wire to the two screws on the adaptor (supplied). Push the plug of this adaptor into the TV external antenna (EXT. ANT.) jack. 2. If the outdoor antenna has two twin lead wires or one round (coaxial) cable, purchase an appropriate adaptor from your dealer. Connect the antenna wires and/or cable to the adaptor, then plug the adaptor into the TV external antenna (EXT. ANT.) jack. EXT.ANT. TINT COLOR UHF/VHF Antenna 300 ohm Flat Twin Leads 75 ohm Coaxial Cable 75 ohm to 300 ohm Adaptor (optional) Adaptor (supplied) Part # 4835 142 17005 or To order any optional accessories call Philips Service Solutions Group at 1-800-851-8885. – 3 – POWER SUPPLY AC Adaptor 1. Insert the barrel plug 1 of the supplied AC Adaptor (Part # 4835 272 17023) into the external power (DC 12–15V) jack. 2. Plug the other end 2 of the AC Adaptor into an electrical outlet. For safety, this plug has one blade wider than the other. If you cannot insert the plug fully into the outlet, try reversing the plug. 2 3. Turn the TV power on by pressing the Power Button. How to Use the Supplied Car Power Cord Connect the barrel plug 1 of the Car Power Cord (Part # 4835 015 57024) to the external power (DC 12–15V) jack. Plug the other end 2 into the car cigarette lighter socket. See Figure 1. CAUTION! Do not let the metal tip of the power cord touch any metal part of the car while the cord is plugged into the cigarette lighter socket. It might blow a fuse or damage the cord. 1 CONTR BRIGHT DC 12 – 15V + – Car Power Cord Figure 1 1 2 To Cigarette Lighter Socket – 4 – HOW TO...
Dieses Handbuch ist für folgende Modelle:Fernseher - RD0525C (106.38 kb)