Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Use the Point 7 8 buttons to adjust the setting value. Contrast Press the Point 7 button to decrease contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color . Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63). Tint . Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63). Color Management The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. 1 1 Use the Point ed buttons to move the red frame pointer to Color Management, and then press the SELECT button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears. 2 2 Use the Point ed7 8 buttons to move the pointer to the spot where you want to adjust the color and then press the SELECT button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color. 3 3 Use the Point ed7 8 buttons to adjust the LEVEL and PHASE of the color, and then press the SELECT button to confirm the setting. Then use the Point ed buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST. COLOR SELECTION MODE IMAGE ADJUST MENU Move the red frame pointer to the desired item and then press SELECT button. Image Adjust Menu icon Use the Point 7 8 buttons to adjust the setting value. POINTER MODE COLOR MANAGEMENT POINTER .Note: . Displayed in grayout in the computer Input. •Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41). •Color management is displayed in grayout when there is no signal . LIST Go to the COLOR MANAGEMENT LIST. Picture Image COLOR SELECTION MODE (continued) COLOR SELECTION MODE COLOR M Level and phase Gamma Return to the COLOR MANAGEMENT POINTER. (If you adjustment palette. adjustment palette. press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) LIST COLOR M MENU MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored. To store the changed settings, be sure to select “LIST” and go to the COLOR MANAGEMENT LIST. 4 4 In the COLOR MANAGEMENT LIST, the adjusted color data are checkmarked. You can decide whether or not to apply the adjusted color data in the list to the projected image (see below). LIST MODE LIST MODE Clear the check mark if you do not want to apply the COLOR PALETTE adjusted color data; select the check mark and then press the SELECT button. The check mark disappears. DEL ALL DEL MENU COLOR M COLOR PALETTE Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.) DEL Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes] ALL DEL Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes]. MENU The same function as stated above. COLOR M The same function as stated above. Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off .... Auto picture control OFF position. L1 ..... Auto picture control LEVEL 1 position. L2 ..... Auto picture control LEVEL 2 position. Color temp Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow). Image Level Menu Move the red frame pointer to an the SELECT button. Image Level Menu Move the red frame pointer to an the SELECT button. Picture Image White balance (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone; press the Point 8 button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point 7 button to lighten red/green/blue tone of the black level of an image; press the Point 8 button to deepen red/ green/blue tone of the black level of an image (from 0 to 63). Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 31). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Noise reduction . Noise interference on the screen can be reduced. Press the Point 7 8 buttons to change the noise reduction mode. Off .... Noise reduction mode is “Off” On .... Noise reduction mode is “On” Progressive . An interlaced video signal can be displayed in progres...
Dieses Handbuch ist für folgende Modelle:Fernseher - LC-W5 (2.7 mb)