Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Use a nylon brush on badly soiled items. • Wipe dry after cleaning and replace items. SOLID PLATES Before using the plates for the first time, switch them on for four minutes at the highest setting. This allows the factory applied protective coating to burn in. The markings around the plate control knobs represent the following heat settings: Position 1 = Warming. 2 = Slow simmer. 3 = Simmer. 4 = Medium heat. 5 = High heat 6 = Boiling and frying. The plate indicator light will glow when a plate is switched on. SOLID PLATE CARE • Use only good quality flat bottomed pots and ensure that the pot diameter is the same as or slightly larger than the plate diameter. This will prevent any spillage from dripping onto the plate itself. • Any spillage should be wiped off as soon as possible with a damp cloth. • A nylon brush may be used to clean badly soiled plates • Periodically wipe the plate with sewing machine oil or electrical hotplate polish (available from Defy Service Centres) to prevent them from corroding. • Do not leave plates wet after cleaning them, but switch them on briefly to dry them. • NOTE: The warranty does not cover the replacement or repair of rusted or corroded solid plates. It is therefore the owners responsibility to care for them as described above. STORAGE COMPARTMENT (SPIRAL) STORAGE COMPARTMENT (SPIRAL) This compartment may be used to store pots, pans and dishes CLEANING (SPIRAL) EXTERIOR • Switch off the electrical supply to the stove before cleaning any part of it • Use a damp soapy cloth and avoid the use of abrasive powders and scouring pads. OVEN • Switch off the electrical supply to the stove before cleaning any part of it. • Use a hot, soapy damp cloth to clean any part of the oven. Stubborn stains may require the use of a nylon scrubbing brush and a liquid cleaner. Do not use metal scouring pads or abrasive cleaners. CLEANING (SOLID) • Switch off the electrical supply to the stove before cleaning any part of it. • Use a hot, soapy damp cloth to clean any part of the oven or the exterior of the stove. • Stubborn stains may require the use of a nylon scrubbing brush and a liquid cleaner. • Avoid using abrasive powders or caustic cleaners. • Do not use metal scouring pads or sharp metal objects to clean any part of the stove. ELEMENT AND GUARD After cleaning the oven, ensure that the oven element is securely clipped into the hook of the element guard. Failure to observe this precaution will allow the element to rest on and damage the oven enamel. CONTROLS CONTROLS PLATE CONTROLS OVEN CONTROL The Ringer timer may be used for timing the cooking process for up to one hour. Wind up the timer by turning the knob fully clockwise and return the knob to the setting required. At the end of the time period the bell will ring. FEATURES CONTROLS CONTROLS OVEN STORAGE COMPARTMENT SPIRAL PLATES OVEN STORAGE COMPARTMENT SOLID PLATES WARNING WARNING SURFACE AREAS OF HEATING AND COOKING APPLIANCES AS WELL AS ELEMENTS AND OVEN INTERIORS GET HOT ALWAYS KEEP CHILDREN WELL AWAY WHEN THE UNIT IS...
Dieses Handbuch ist für folgende Modelle:Standbacköfen - 521 (74.96 kb)