Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Press PR+ or PR-keys on the remote control. For this process, you can also use the buttons on your TV. The picture will appear on the screen after a short while. Note: If you are not going to use your television for a long time, unplug its power cable from the socket. 4.3-Performing initial start and settings To set up your television, read the sections on the TV controls and making the channel settings. 4.4-Batteries Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5 V batteries are suitable. Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose. Do not mix used batteries with new ones or different types of batteries together. The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV. 7 5 Your new television 5 Your new television 5.1-TV Control Panel or or Program Down/Up button or or Volume Level Down/Up button or or or or Stand by indicator Menu button/Source selection button Bright light: TV is in Stand-by or or or Dimmed light: TV is On No light: Power Cable is not connected. Power/Standby button 5.2-Rear and Side External Connections 1 Component video input (Y) 2 Component audio input (L) 3 Component video input (Pb) 4 Component audio input (R) 5 Component video input (Pr) 6 SPDIF Digital audio output 7 VGA (PC connection) input 8 PC audio input 9 Antenna input 10 Scart input 11 Power input 12 S-Video input 13 Audio input Phono connector (Left/L) 14 Video input Phono connector 15 Sound input Phono connector (Right/R) 16 Stereo Headphone socket 17 HDMI 1 input 18 HDMI 2 input 19 CI slot input • Above drawing for external connections is representational. Their order and places on your TV may be different. • Please see Technical Specifications Table on page 31 for the available external connections on your television. • Please do not use the video Phono and S-Video connection simultaneously, otherwise these two devices might influence the picture quality of one another. 8 5.3-Remote Control Standby Temporary off button AV Source Menu button Temporary sound mute button 16:9 Picture format selection button Picture and Teletext (PAT) button Zoom Zoom mode selection button SUBT Subtitle selection button (D) Teletext sub page button (Sub) AUDIO Audio language selection button (D) FAV Favorites channel list selection button (D) Teletext page stop button (Stop) EPG EPG menu button (D) Teletext Question/Answer button (Reveal) INFO Information display button Teletext mode index page button MENU Enter menu button 1....0 Numeric buttons BACK Return to previous menu button EXIT Menu exit button Up/Down movement buttons Right/Left movement buttons OK Confirmation button Channel List button outside the menu Vol-/Vol+ Volume down/up buttons PR+ / PR-Program forward/backward buttons Red Teletext button Green Teletext button Yellow Teletext button Blue Teletext button TXT TV/Teletext/MIX selection button Sound mode selection button Teletext page enlarge button (Double) Picture mode selection button Teletext Update button SWAP Switching back to the last viewed channel button FREEZE Picture pause button SIZE Time display button PIP/POS These buttons have no function (D): Digital Mode Only. Note: When there is no menu open on the screen, up/down movement buttons have the same function with the PR+/PR- buttons and left/right movement buttons have the same function with the Vol+/ Vol- buttons. 9 6 Performing the initial power-on settings 6 Performing the initial power-on settings 6.1-TV controls 6.1.1-Temporary on/off (STAND-BY) When you press the red STANDBY button located on your remote control while your television is switched on, the sound and the picture will go off. In the stand-by mode, the power indicator of your television will glow brighter. To switch your television back on, either press any numeric button or P+/P-buttons. Caution! If you are not going to use your television for a long time, unplug its power cable from the socket. 6.1.2-Digital TV, Analogue TV and AV Mode selection Press the Source button on your remote control. SOURCE menu will be displayed. Select DTV(Digital TV), ATV (Analogue TV) or desired AV mode from the Source menu with up/down movement buttons and confirm with OK button so that your television will switch to the source you have selected. 6.1.3-Channel Selection You may select program number you would like by pressing the P+/P-buttons on your television and on your remote control. To select the programs that are above 9, you can use the Numerical buttons. You may enter the number of the program you would like to select using the numerical buttons. For example, to switch to the program number 12, press the numeric buttons 1 and 2 on your remote control. You can perform the program selection also from the Program Table and Channel List menus. 6.1.4-T...