Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Samsung Dateigröße: 18.57 mb Dateiname: Unterrichtssprache:

You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). 1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable. You can connect the LAN via a Sharer (Router). N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the values, ask your network administrator. N For the information on how to configure and connect a Sharer (Router), refer to the owner's manual for the corresponding product. N You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP N For the procedures to use a static IP address, ask your Internet Service Provider. English - 27 □ Network Connection - Wireless You can connect to the network wirelessly through a wireless IP sharer. 1. Connect the ‘Samsung Wireless LAN Adapter' into the uSB1(HDD) or uSB2 terminal of the TV. N You must use the ‘Samsung Wireless LAN Adapter'(WIS09ABGN) to use a wireless network. N Samsung's Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, Ecommerce sites and Samsungparts.com. N To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. N Samsung's Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly. N If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on. N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail. N If you apply a security system other than the systems listed blow, it will not work with the TV. - When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK 2) Encryption Type : WEP, TKIP, AES - When applying the security key for the Ad-hoc mode, only the following is supported. 1) Authentication Mode : SHARED, WPANONE 2) Encryption Type : WEP, TKIP, AES N If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode. N If the device isn't certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter'. English - 28 J Setting the Network □ Network Type Select Cable or Wireless as the method to connect to the network. N The menu is activated only if the ‘Samsung Wireless LAN Adapter' is connected. ■ Cable Connect to the network using a cable. ■ Wireless Connect to the network wirelessly. □ Network Setup ■ Cable Network Setup (when Network Type is set to Cable) N Please check if the LAN cable is connected. • Internet Protocol Setup — Auto / Manual • Network Test: You can test or confirm the network connection status after setting up the network. N When unable to connect to a wired network If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC). In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router). The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics. Cable Network Setup-Auto If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. 1. Set Network Type to Cable. 2. Select Cable Network Setup. 3. Set Internet Protocol Setup to Auto. N The Internet Protocol is set automatically. 4. Select Network Test to check the network...

Herunterladen

Geben Sie zwei Ziffern: