Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
To save an enlarged or reduced image (Crop and save) 1Press MENU while the enlarged or reduced image is displayed. 2Press v/V to select the saving method. If you select [Save as new image], a copy of the image is saved. Go to step 3. If you select [Overwrite], the new image overwrites the old image. Go to step 5. 3Press v/V to select the device on which the image is saved and press ENTER. 4Press v/V to select a destination folder and press ENTER. 5Press v/V to select [Yes] and press ENTER. The image is saved. 6When the confirmation screen appears, press ENTER. Tip If you move the enlarged image with B/b/v/V and press MENU in step 1, the image is trimmed into the displayed image size and saved. Notes • You cannot overwrite files except for a JPEG file (extension: .jpg). • Enlarging an image may reduce the quality depending on the image size. • A video file cannot be enlarged or reduced. Rotating an image You can rotate an image during Single view mode. 1 Press MENU in Single view mode. 2 Press B/b to select the (Editing) tab. 3 Press v/V to select [Rotate] and press ENTER. 4 Press v/V to select the angle of rotation and press ENTER. You can select an angle of rotation from among 90 degrees, 180 degrees, and 270 degrees clockwise. Using the remote control You can also rotate an image with (ROTATE) on the remote control. The image rotates 90 degrees counterclockwise every time you press the button. 34 GB Tips • For an internal memory image, image rotation data will be retained even after the power is turned off. • You can also rotate the index image display. Note You cannot rotate a video file. Changing the settings of the auto power on/off function You can use the timer function to turn the photo frame on or off automatically when the photo frame is turned on. 1 Press MENU. 2 Press B/b to select the (Settings) tab. 3 Press v/V to select [Auto Power ON/ OFF] and press ENTER. The [Auto Power ON/OFF] screen is displayed. 4 Press v/V to select [Setup method] and press ENTER. Press v/V to select [Simple], [Advanced] or [Auto off] and press ENTER. [Simple]: Sets the auto power on/off function in one minute increments. [Advanced]: Sets the auto power on/off function according to a day of the week in one hour increments. [Auto off]: Sets the auto power off time when the specified time has elapsed with no operation after the photo frame is turned on. You can specify two or four hours as an elapsed time. Continued 35 GB Advanced operations Note Note 5 Press v/V to select [Time Setting] and press ENTER. [Simple] 1Select an item for which you want to set the time. Press v/V to select [Power-ON timer] or [Power-OFF timer] and press ENTER. Press v/V to select [Enable] and press ENTER. 2Set the time at which you want to activate the Power-ON timer or Power- OFF timer. Press v/V to select [Auto ON time] or [Auto OFF time] and press ENTER. Press B/b to select the hour or minute, press v/V to set the hour or minute, and press ENTER. 3Set the day of the week on which you want to activate the timer. Press v/V to select [Auto ON day] or [Auto OFF day] and press ENTER. Press v/V to select the day of the week on which you want to activate the timer and press ENTER. The select day of the week is checked. Press v/V to move the cursor to [OK] and press ENTER. [Advanced] 1Press B/b/v/V to select the time you want to use the auto power on/off function. You can set this function according to a day of the week by one hour units. The color of the selected time zone changes to blue after you press ENTER. The power supply of the photo frame will be turned on when the blue time zone time occurs. The color of the selected time zone changes to gray, after you select the blue time zone and then press ENTER. The power supply of the photo frame is turned off while it is in the gray time zone. Tip The power is turned off automatically at the time you set for [Power-OFF timer] when you are using the photo frame. The power is turned on automatically at the time you set for [Power-ON timer] during the standby mode. 2Press B/b/v/V to select [OK] and then press ENTER. [Auto off] 36 GB Press v/V to select an elapsed time which you want to turn off the photo frame automatically: 2 hours, 4 hours or Disable. Press v/V to select an elapsed time which you want to turn off the photo frame automatically: 2 hours, 4 hours or Disable. 6 Press MENU. Changing the settings You can change the following settings. • Slideshow Settings • Slideshow BGM Settings • Auto Power ON/OFF • Date/time Settings • General Settings (Listing Order, Sony logo ON/OFF etc,.) • Language Setting • Initialize Setting procedure 1 Press MENU. 2 Press B/b to select the (Settings) tab. Advanced operations 3Press v/V to select the item you want to change and press ENTER. The setting screen of the selected item is displayed. For example, when [Slideshow Settings] is selected. Continued 37 GB 4 4 want to change and press ENTER. This enables you to set each of the items (page 39). Note When the p...
Dieses Handbuch ist für folgende Modelle:Bilderrahmen - DPF-D830L (3.62 mb)