Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Samsung Dateigröße: 13.12 mb Dateiname: Unterrichtssprache:

(This menu works only for a device supporting recording.) Menu on Device Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder's title menu appears. Device Operation Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Receiver Sound is output through the receiver. Setup You can set the environment for using Anynet+. TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. Numeric buttons ▲ /▼/◄/►/ENTER/OK buttons Color buttons EXIT button After switching to the device, while playing a file ◄ ◄(Backward search) ► ►(Forward search) ■ (Stop) ►|| (Play/Pause) Device with built-in Tuner After switching to the device, when you are watching a TV program CH ▲/▼ button Audio Device When Receiver is activated VOL +/- button MUTE button Anyview2 When watching TV ►|| (Play/Pause) ^ The Anynet+ function only works when the remote control Is set to TV ^ The REC button works only while in the recordable state. ^ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control. ^ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device. ^ The Anynet+ functions don’t operate for the products from other manufacturers. ^ In Anynet+ mode, the color buttons may not work properly ^ The ◄ ◄, ►► operations may differ depending on the device. Recording You can make a recording of a TV program using a recorder. Press the REC button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) ^ The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. ^ You can also record the source streams by selecting Record after pressing the Anynet+ button. ^ Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. English - 42 Listening through a Receiver You can listen to sound through a receiver instead of the TV speaker. 1. 3. Press the Anynet+ button. Press the ▲ or ▼ button to select Receiver, then press the ENTER/OK button. Press the ◄ or ► button to select to On, then press the ENTER/OK button. Now you can listen to sound through the receiver. Press the EXIT button to exit. When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the device list. Air 28 ' View TV Select Device > —— Record » — Menu on Device > ___Device Operation » 4) Receiver :On ^ In case of a content with copyright problem, listening through the receiver may not properly operate. ^ When listening through the receiver, there are restrictions for using the PIP and audio-related menu. 2 Check Points before Requesting Service Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver. ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device’s Video/Audio/HDMI cable connections. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn’t work at a certain condition. (Searching channels) ■ When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the Anynet+ menu and select a menu you want. I want to exit Anynet+. ■ Select View TV in Anynet+ menu. ■ Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of CH, CH LIST, PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The Connecting to Anynet+ device... message appears on the screen. ■ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. You cannot use the play function when Plug & Play is in progress. The connected device is not displayed. ■ Check whe...

Herunterladen

Geben Sie zwei Ziffern: