Stimmen - 12, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the POWERS button on the remote control. The screen is turned off and a standby indicator appears on the lower-right panel. 2. To switch your set back on, simply press the POWER (!), numeric buttons (0~9) or channel up/down ( ~ / v ) button again. ^ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. Plug & Play Plug&Play | When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available. 1. Press the POWER* button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected. 2. Select the appropriate language by pressing the ^ or ▼ button. Press the ENTER < button to confirm your choice. 3. The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER * button. Please check that the antenna cable is connected correctly. English-6 4. Select the appropriate country by pressing the or ▼ button. Press the ENTER < button to confirm your choice. 5. The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER < button. ^ The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. ^ Press the ENTER < button at any time to interrupt the memorization process. 6. Press the ENTER < button. Select the “Hour” or “Minute” by pressing the < or ► button. Set the “Hour” or “Minute” by pressing the ^ or ▼ button. You can also set the hour and minute by pressing the number buttons on the remote control. 7. Press the ENTER < button to confirm your setting. ♦ Language: Select your language. ♦ Country: Select your country. ♦ Auto Store: Automatically scans for and stores channels available in the local area. ♦ Clock Set: Sets the current time for the TV clock. 1 Setup 1 f Plug & Play ► Language : English ► Blue Screw : Off ► 49 ft n | ▼Mov* B’Enter HDRBtum | 1 If you want to reset this feature... 1. Press the MENU button to display the menu. Press the * or ▼ button to select “Setup”, then press the ENTER < button. 2. Press the * or ▼ button to select “Plug & Play”, then press the ENTER < button. 3. This will change or reset the settings. SETTING THE CHANNELS Storing Channels Automatically country | You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Channel”, then press the ENTER < button. Press the ENTER < button to select “Country”. Select the appropriate country by pressing the ^ or ▼ button. Press the ENTER < button to confirm your choice. 4. Press the ^ or ▼ button to select “Auto Store”, then press the ENTER « button. 5. Press the ENTER < button. ^ The TV will begin memorizing all of the available channels. ^ Press the ENTER < button at any time to interrupt the memorization process and return to the “Channel” menu. 6. After all the available channels are stored, the “Sort” menu appears. English-7 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: ♦ Whether or not to store each of the channels found. + The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Channel”, then press the ENTER < button. 2. Press the ^ or ▼ button to select “Manual Store”, then press the ENTER < button. 3. Press the ENTER < button to select “Programme”. 4. To assign a programme number to a channel, find the correct number by pressing the ^ or ▼ button and then press the ENTER < button. 5. Press the ^ or ▼ button to select “Colour System”, then press the ENTER * button. 6. Select the colour standard required by pressing the ^ or ▼ button, then press the ENTER * button. 7. Press the ^ or ▼ button to select “Sound System”, then press the ENTER * button. 8. Select the sound standard required by pressing the ^ or ▼ button, then press the ENTER < button. ^ If there is an abnormal sound or no sound, re-select the sound system required. 9. If you know the number of the channel to be stored, press the ^ or ▼ button to select “Channel”. Press the ENTER < button. Select C (Air channel) or S (Cable channel) by pressing the ^ or ▼ button. Press the ► button to select channel. Select the required number by pressing the ^ or ▼ button and then press the ENTER < button. ^ Channel mode: P (Programme mode) C (Air channel mode) S (Cable channel mode) 10. If you...
Dieses Handbuch ist für folgende Modelle:Fernseher - LE15S51BP (5.16 mb)