Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: GE Dateigröße: 528.08 kb Dateiname: a04f6500-c24b-4c95-927d-0d4146bef583.pdf Unterrichtssprache:

1. Cotton Button in OUTWARD POSITION means HIGH heat. 2. Synthetic Button in INWARD POSITION means LOW heat. English • Cotton Cycle: This can be either HIGH or LOW heat dry cycle depending on what type of clothes you want to dry for up to 120 minutes. • Synthetic Cycle: This cycle is used for synthetic fabrics where you can use dry time up to 60 minutes at low heat setting. (Please refer to Cotton/Synthetic Dry Button setting explanation, p.5) • Delicate Cycle: This cycle is used for delicate fabrics where you can use dry time up to 80 minutes. The low heat setting is preset in this cycle. Understanding the Drying Temperature: • In your dryer if the temperature goes over 117 Degree F/47 Degree C the sensor will shut off the heat and the drum will stop spinning. At 99 Degree F/37 Degree C temperature the heat will come on and drum will resume spinning. • Each cycle ends with a cool down period. The heat automatically turns off and load continues to tumble for 5-10 minutes. This will reduce wrinkling of your clothes. English Please follow the chart below for proper cycle/time/clothes selections. CYCLE TYPE HEAT TYPE CLOTHES/FABRICS Cotton Cycle High For heavy/lightweight cottons and “Tumble Dry” labeled clothes Synthetic Cycle Low Synthetic fabrics, Cotton knits Synthetic Cycle High Synthetic fabrics: nylon, orlon, Polyester etc Delicate Cycle Low For heat sensitive clothes and for “Tumble Dry” low and warm label clothes, special care fabrics, wool Note: Cotton Cycle is also known as Regular Cycle Synthetic Cycle is also known as Permanent Press Cycle Note: Drying time varies depending on size, dampness of load, weight, fabric type, room temperature, humidity and type of exhaust installation. English Start Button: • Once you have made your selection of the cycle, time and heat setting, you need to push start button to turn the power on. You will see the power light comes on indicating that power is on. Note: The way this start button is designed that when you press the button, it will return to outward position instead of staying in inward position. Note: If you want to add or remove clothes while dryer is on, simply by pressing START button will stop the dryer. Open the door and make your changes. Close the door and by pressing START button will reset the dryer. English Synthetic Light: • You must have synthetic button in its inward position in order to have the light "ON". When cycle is about to finish and goes in cool dry at the end, you will notice that the light will go "OFF". Note: If the light does not come on then check the position of synthetic button. (Please refer to Cotton/Synthetic Button setting explanation, p.5) Clean Filter Light: • When there are last 10 minutes left in the cycle, you will see that the light will come "ON". This is a reminder to clean the filter after the cycle is finished. Note: The light will come on automatically if the outside temperature of the exhaust duct is higher than 117°F/47°C. English Lint Filter: • It is located on middle-front behind door. The filters slides out easily for cleaning. • It is ok to wash the lint filter with water and/or soap. • Check filter before each use to assure it is free of lint. • A clean lint filte...

Herunterladen

Geben Sie zwei Ziffern: