Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Frigidaire Dateigröße: 528.08 kb Dateiname: a04f6500-c24b-4c95-927d-0d4146bef583.pdf Unterrichtssprache:

English Start Button: • Once you have made your selection of the cycle, time and heat setting, you need to push start button to turn the power on. You will see the power light comes on indicating that power is on. Note: The way this start button is designed that when you press the button, it will return to outward position instead of staying in inward position. Note: If you want to add or remove clothes while dryer is on, simply by pressing START button will stop the dryer. Open the door and make your changes. Close the door and by pressing START button will reset the dryer. English Synthetic Light: • You must have synthetic button in its inward position in order to have the light "ON". When cycle is about to finish and goes in cool dry at the end, you will notice that the light will go "OFF". Note: If the light does not come on then check the position of synthetic button. (Please refer to Cotton/Synthetic Button setting explanation, p.5) Clean Filter Light: • When there are last 10 minutes left in the cycle, you will see that the light will come "ON". This is a reminder to clean the filter after the cycle is finished. Note: The light will come on automatically if the outside temperature of the exhaust duct is higher than 117°F/47°C. English Lint Filter: • It is located on middle-front behind door. The filters slides out easily for cleaning. • It is ok to wash the lint filter with water and/or soap. • Check filter before each use to assure it is free of lint. • A clean lint filter ensures efficient drying and clothes will remain lint-free when unloading the dryer. If lint filter is full of dust and lint, it will reduce air flow through the dryer and increase drying time. Leveling Legs: •Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After properly placing your dryer in its proper position, you can level you dryer. • Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer. 10 English Operations 1. Sort clothes for drying. Separate dark and light colored items, like you do for washing. Check for stains that have not been removed in washing. Dryer heat may permanently set some stains. Properly dried clothes will need minimum of care when removed from dryer. 2. Load up dryer with washed clothes. For optimum results, use dryer load of similar weight, fabric and construction. Place small items in a mesh bag to prevent from tangling. Do not overload the dryer. An average load will fill up half the drum. Add fabric softener sheet if desired. 3. Select the drying temperature depending on the fabric type. 4. Select the drying time depending on the fabric type and load size. 5. Push the start button to start the drying cycle. 6. Wait for the drying cycle to finish before opening the dryer door. 7. Clean the lint filter after every load and before each use. A clean filter ensures sufficient drying. A layer of lint on the filter reduces airflow through the clothes and reduces drying time. Note: Do not over dry clothes. Over drying can cause shrinkage, harshness and wrinkling of fabric. Normal Operating Sounds Following sounds are normally heard during the...

Herunterladen

Geben Sie zwei Ziffern: