Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Samsung Dateigröße: 4.47 mb Dateiname: Unterrichtssprache:

SETTINGS Low or Extra Low Low or Extra Low Air Fluff Air Fluff Air Fluff or Heat (Extra Low) 02 operating Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and WARNING lead to a fire hazard. operating Instructions, tips _23 DV219AGW-02691A_EN.indd 23 2009-01-30 .AEA 6:19:30 operating Instructions, tips CLEAN THE LINT FILTER • After each load. • To shorten drying time. • To operate more energy efficiently. Do not operate your dryer without the lint filter in place. LOAD THE DRYER PROPERLY • Place only one washload in your dryer at a time. • Mixed loads of heavy and lightweight fabrics will dry differently, which may result in lightweight fabrics being dry while heavy fabrics remain damp at the end of a drying cycle. • Add one or more similar items to your dryer when only one or two articles of clothing need drying. This improves the tumbling action and drying efficiency. • Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some fabrics. GETTING STARTED 1. Load your dryer loosely – DO NOT overload. 2. Close the door. 3. Select the appropriate cycle and options for the load (see pages 20, 21). 4. Press the Start/Pause button. 5. The dryer indicator light will illuminate. 6. The estimated cycle time will appear in the display. The time may fluctuate to better indicate drying time remaining in the cycle. • When the cycle is complete, the Door Lock light will go out and “End” will appear in the display. • Pressing Power cancels the cycle and stops your dryer. • The Drying, Cooling, and Done indicator lights will illuminate during those portions of the cycle. 24_ operating Instructions, tips DV219AGW-02691A_EN.indd 24 2009-01-30 .AEA 6:19:30 care and cleaning CONTROL PANEL Clean with a soft, damp cloth. Do not use abrasive substances. Do not spray cleaners directly on the panel. The control panel finish may be damaged by some laundry pre-treatment soil and stain remover products. Apply such products away from your Dryer and wipe up any spills or overspray immediately. TUMBLER Remove any stains such as crayon, ink, or fabric dye (from new items such as towels or jeans) with an all- purpose cleaner. Tumble old towels or rags to remove any excess stain or cleaning substance. Once these steps are followed, stains may still be visible, but should not transfer to subsequent loads. STAINLESS STEEL TUMBLER To clean the stainless steel tumbler, use a damp cloth with a mild, non-abrasive cleaner suitable for stainless steel surfaces. Remove the cleaner residue and dry with a clean cloth. DRYER EXTERIOR The entire dryer has a high-gloss finish. Clean with a soft, damp cloth. Do not use abrasive substances. Protect the surface from sharp objects as they may scratch or damage the finish. Do not place any heavy or sharp objects or a detergent box on the dryer. Keep them on the purchased pedestal or in a separate storage box. DRYER EXHAUST SYSTEM Should be inspected and cleaned yearly to maintain optimum performance. The outside exhaust hood should be cleaned more frequently to ensure proper operation. 03 care and cleaning care and cleaning _25 DV219AGW-02691A_EN.indd 25 2009-01-30 .AEA 6:19:30 special laundry tips SPECIAL LAUNDRY TIPS Please follow the care label or manufacturer’s instructions for drying special items. If care label instructions are not available, use the following information as a guide. Bedspreads & Comforters Blankets Curtains & Draperies Cloth Diapers Down–filled Items (jackets, sleeping bags, comforters, etc.) Foam Rubber (rug backs, stuffed toys, shoulder pads, etc.) Pillows Plastics (shower curtains, outdoor furniture covers, etc.) THINGS TO AVOID : • Follow the care label instructions or dry on the Normal cycle and High temperature. • Make sure the item is thoroughly dry before using or storing. • May require repositioning to ensure even drying. • Use Normal cycle and dry only one blanket at a time for best tumbling action. • Make sure the item is thoroughly dry before using or storing. • Use the Perm Press cycle and Low or Extra Low temperature to help minimize wrinkling. • Dry these in small loads for best results and remove as soon as possible. • Use the Normal cycle and the High temperature settings for soft, fluffy diapers. • DO NOT dry on a heat setting. Use the Air Fluff cycle (no heat). • WARNING – Drying a rubber item with heat may damage it or be a fire hazard. • Use the Normal cycle. • Add a couple of dry towels to help the tumbling action and to fluff the item. • DO NOT dry kapok or foam pillows in the Dryer. Use the Air Fluff cycle. • Use the Air Fluff cycle or the Time Dry cycle and the Low or Extra Low temperature settings depending on the care label instructions. • Use the Normal cycle and the Low or Extra Low temperature setting. • Adding a couple of dry towels shortens drying time and absorbs moisture. • Fiberglass items (curtains, draperies, etc.). • Woolens, unless recommended on the label. • Vegetab...

Herunterladen

Geben Sie zwei Ziffern: