Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
2.Unfold washing and load it loosely into the machine. Mix large and small items. Attention! Do not get any washing caught between the door and the rubber seal. 3.Push the door firmly shut. Door catch must audibly click shut. Adding detergent /conditioner Important: Only use detergents/conditioners that are suitable for use in household washing machines. Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging. The amount of detergent used depends on: – the degree of soiling, – the load size – the hardness of the tap water. • If the manufacturer does not make any recommendations with regard to small volumes of washing: For a half-load use a third less, and for a very small load use only the half the amount of detergent that is recommended for a full load. • Water softener should be used from water hardness range 2 (=medium). The amount of detergent used can then always be that as for hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area. 1.Pull out the detergent drawer as far as it will go. 2.Add the detergent/conditioner. 3.Push the detergent drawer in fully. Stain removal agent/ stain removal tablets Washing powder/tablets for the main wash cycle Conditioner/Wash-care products to preserve the shape of garments/Starch Washing powder/tablets for the pre wash cycle or water softener Stain removal agent/ stain removal tablets Washing powder/tablets for the main wash cycle Conditioner/Wash-care products to preserve the shape of garments/Starch Washing powder/tablets for the pre wash cycle or water softener Washing powder/tablets for the main wash cycle If you are using water softener and require the right compartment for detergent for the pre-wash cycle, add the water softener on top of the detergent for the main wash cycle in the left compartment. Softener, wash-care products to preserve the shape of garments, starch Fill the compartment to no more than the MAX indicator. Add water to thick liquid concentrates in accordance with the manufacturer’s instructions before using them. Dissolve powder starch. If you are using liquid detergent: Add liquid detergent using measuring containers provided by the detergent manufacturer. Switching on the appliance/selecting a programme Select the programme using the programme knob, e. g., LINEN/EASY CARES. 3 When you select a programme, you switch the appliance on at the same time. – The display lights up and shows the programme set, the current time and the estimated end of the cycle. – Depending on the programme, the washing machine suggests a temperature and a spin speed. You can change these suggestions. – The lighting for the display switches itself off at the end of the cycle or, if the appliance is not started after the programme is set, after 10 minutes. To switch the light on again, press any key or turn the programme knob. Changing the temperature Press the TEMP. key repeat LINEN/EASY CARES 12.45 edly until the desired tem 14.37 Cycle end at perature is displayed. 50C1600 ayyyyyayayayayayayayaya TEMP. RPM OPTIONS OK TIME Changing spin speed/selecting rinse hold Press the RPM key repeated LINEN/EASY CARES 12.45 ly, until the desired spin 14.37 Cycle end at speed or RINSE HOLD is displayed. 50C 800 ayyyyyayayayayayayayaya TEMP. RPM OPTIONS OK TIME 3 • With spin speed “0” the last rinse water is drained off at the end of the cycle, but the washing is not spun. • With RINSE HOLD the washing is left to soak in the last rinse water. There is no final spin after the intermediate spin(s). Intermediate spins are programme-dependent and cannot be altered. Setting options Options can be added to a wash cycle that has already been selected. Press the OPTIONS key. The display shows the symbols for the options. PREWASH Pre-washes at about 30 °C before the main wash cycle, which follows automatically. SENSITIVE Enhanced rinse action through an additional rinse cycle together with decreased drum movement (improved fabric care). Ideal when frequent washes are necessary, e. g. in cases of over-sensitive skin. An additional rinse cycle can also be permanently set (see section “Setup”). STAIN For heavily soiled or stained washing. In-wash stain treatment products are washed in at the optimum time as the programme progresses. NIGHT CYCLE The washing is left to soak in the final rinse water. There is no final spin and no intermediate spin. Because of this the programme runs very quietly. NIGHT CYCLE is therefore particularly suitable if you want to wash at night. Setup The special functions that can be set under Setup remain permanently stored in the appliance, e. g., time, language, etc. (see section “Setup”), until they are changed or deactivated. 3 Only the options that can be combined with the cycle that has already been set are shown in the display. Prewash, Sensitive, Stain, Night Cycle 1.Press the OPTIONS key re LINEN/EASY CARES 12.45 ...