Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Beko Dateigröße: 579.02 kb Dateiname: Unterrichtssprache:

C The auxiliary functions in the table may differ according to the model of your machine. 19 EN Auxiliary functions Auxiliary function selection keys 11a 11b 11c 11d • Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d. • Select the required auxiliary functions before starting the program. • Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a) and Quick Wash (Figure 2-11b). • Symbol of the selected auxiliary function (Figure 3-13l) will light up. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. (Ex.: If you want to select prewash first and then quick wash, prewash will be cancelled and quick wash will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”) Prewash When you select this function (11a), the display will indicate “F1” symbol. • A prewash is only required with heavily soiled laundry. Without prewash you save energy, water, detergent and time. • Prewash without detergent is recommended for veils and curtains. Quick wash With this program (11b), the wash time is shortened. “F2” symbol will light up on the display. • Use this function for smaller amounts or slightly soiled laundries. Extra rinse This function (11c) allows your machine to perform an extra rinsing in addition to the rinsing cycles performed by your machine after main washing cycle. Thus, the risk for sensitive skins (babies, allergic skins and etc.) to be effected by the minimal detergent remnants on the laundry is reduced. “F3” symbol will light up on the display. Anti-creasing With this function (11d), drum rotation will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. “F4” symbol will light up on the display. • Use this function for delicate laundries that crease easily. C Whenever you select this auxiliary function, load your machine with half of the maximum laundry amount specified in the program table. Time screen The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”. • Program duration may differ from the values in the consumption table subject to the changes in the water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, auxiliary functions selected, and changes in the supply voltage. EN 20 Time delay With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill with detergent. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press “Time delaying” buttons “+” and “-” (Figure 2-8) to set your desired time delay. Time delaying symbol (Figure 3-13h) will flash. 4. Press “Start/Pause/Cancel” button (Figure 2-10). Then the time delay starts to count down. Time delaying symbol (Figure 3-13h) will light up. Start symbol (Figure 3-13j) will light up. The “:” in the middle of the displayed time delay will start flashing. • More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol (Figure 3-13h) fades and the washing starts as the program duration is displayed. Changing the delay time If you want to change the time during the countdown: 1. Press “Start/Pause/Cancel” button (Figure 2-10). “:” in the middle of the screen will stop flashing. Standby symbol (Figure 3-13k) will light up. Time delaying symbol (Figure 3-13h) will flash. Start Symbol (Figure 3-13j) will fade. 2. Press “Time delaying” buttons “+” and “-” (Figure 2-8) to set your desired time delay. 3. Press “Start/Pause/Cancel” button (Figure 2-10). Time delaying symbol (Figure 3-13h) will light up. Standby symbol (Figure 3-13k) will fade. Start symbol (Figure 3-13j) will light up. 4. The “:” in the middle of the displayed time delay will start flashing. Cancelling the time delay If you want to cancel the time delay countdown and start the program immediately: 1. Press “Start/Pause/Cancel” button (Figure 2-10). The “:” in the middle of the displayed time delay will stop flashing. 2. Start symbol (Figure 3-13j) will fade. The standby symbol (Figure 3-13k) and the time delaying symbol (Figure 3-13h) will flash. 3. Press time delaying button “-” (Figure 2-8) to decrease the desired time delay. Program duration after 30 minutes shall be displayed. 4. Press “Start/Pause/Cancel Button” (Figure 2-10) to start the program. Starting the program 1. Press “Start/Pause/Cancel” button (Figure 2-10) to start the program. 2. The start symbol (Figure 3-13j) which indicates that the program h...

Herunterladen

Geben Sie zwei Ziffern: