Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Beko Dateigröße: 660.42 kb Dateiname: Unterrichtssprache:

• Some combinations cannot be selected together. • Warning signal on the selected auxiliary function will light up. Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active. Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Selection Table”) • Prewash A pre-wash is only worthwhile for heavily soiled laundry. Without pre-wash you save energy, water, detergent and time. C Pre-wash without detergent is recommended for lace and curtains. Less detergent should be put in the main wash compartment as loose knit fabrics (lace) foam too much due to its meshed structure. • Extra Rinse With this function, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remainder detergent on the clothes will be decreased. • Rinse Hold If you do not want to unload your clothes immediately after the cotton, synthetics, woolen and delicate fabrics program, you may release your clothes inside the machine in the last rinsing water by pressing the rinse hold button in order to prevent your clothes become wrinkled. After this process you may spin your laundry by pressing “Start/ Pause/Cancel” button or you may end the program by pressing “Start/Pause/ Cancel” button for 3 sec. • In the machines equipped with spin speed selection knob or button, you can spin by selecting the desired spin speed and press “Start/Pause/ Cancel” button. • As for machines not equipped with a spin speed selection knob, you can end the program without a spin cycle by pressing the “Start/Pause/Cancel” button and draining the water. If you wish your clothes be spun, you can spin them by selecting “pump+spin” program. • No Heat If you wish to wash your clothes in cold water, you can use this program. • No Spin You may use this program if you do not want to spin your clothes at the end of cottons, synthetics, woolen or delicate programs. • Spin speed reduction You may use the speed reduction button whenever you wish to spin your clothes below the maximum spin speed. When speed reduction button is pressed, spin speed will be at the minimum rpm given on the panel. Starting the Program 1. Press “Start/Pause/Cancel” button to start the program. 2. “Start/Pause/Cancel” button will light up to indicate that the program has started. 3. The door is locked and the “Lid” light fades. Progressing a program Progress of a running program is shown through the program follow-up indicator. • At the beginning of every program step, the relevant indicator lamp will light up and light of the completed step will turn off. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out. The “Wash” light on the program follow- up indicator illuminates when “Start/ Pause/Cancel” button is pressed after selecting the washing program. The “Program finished” lamp illuminates and the “Wash” light will fade when the program comes to an end. The “Lid” light flashes. Meanwhile, the door will stay locked for your safety and when it is safe to open, the “Lid” and “Program Finished” lights remain on. You can put your machine into “Pause” mode by pressing the “Start/Pause/ Cancel” button when it is operating. In this case, the “Start/Pause/Cancel” light will flash. Some changes in program settings can be made in pause mode (See. Changing a Program) and if “Pause” mode is entered at an appropriate step of the program, the adding laundry function may be used. (See, Adding and taking out laundry). Press “Start/Pause/Cancel” button again to return to the “Wash” mode from “Pause” mode. In this case the “Start/Pause/Cancel” button will light up continuously and the machine will resume operating from the step it was paused. •If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of unbalanced distribution of laundry in the machine. Changing the program after the program has started You can use this feature after your machine has started to wash different textile groups in the same batch of clothes under higher or lower temperatures. For example; Press and hold the “Start/Pause/ Cancel” button for 3 seconds to “Cancel” the program in order to select “Cottons 40” program instead of “Cottons 60” program. Select the “Cottons 40” program by rotating the program knob. Press “Start/Pause/Cancel” button to start the program. C The program which is selected first will go on even if the program selection button is moved and another program mode is selected while the machine is operating. You must cancel the ongoing program in order to change the washing program. (See, Canceling a Program) Selecting or cancelling an auxiliary func...

Herunterladen

Geben Sie zwei Ziffern: