Login:
Stimmen - 4, Durchschnittliche Bewertung: 2.8 ( )

Anleitung Maytag, modell 12001454

Hersteller: Maytag
Dateigröße: 46.11 kb
Dateiname: 55cefb82-9b08-4d49-ba32-ab453b91db69.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


: 12001454,12001725 description : Machine Control Board Kit 1 This kit contains: 22002988 Machine Control Board 22002335 Jumper Wire (Red Wire No. 3) 22002281 Pilot Lamp (Yellow based) 16002292 Schematic 16008915 Instruction Sheet The following chart will depict which components apply to the washer you are servicing. Model Number Prior to Series 17 Series 17 & Later MAH3000Am A B MAH3000AWQ A B MAH3000AWW A B 84JDE BOARD-LEFT MOMMTwa BRACKET'S MOUNTING NUT* COWTROt. BOARD ^ = Use all components and follow instruction steps 1-11 below. = Use only the 22002988 board and follow instruction steps 1,2, 9,10 & 11 below. » rocedure: 1. Unplug the washer. 2. Remove the three screws securing the rear console cover plate to the console and lay the console forward carefully onto a service blanket on the top cover. 3. Locate the ON Light in the console and remove the Black No. 3 wire and the White No. 11 wire from the signal lamp assembly. Unsnap and discard the ON Light lamp assembly. 4. Fold the Black No. 3 wire back and tape the wire to the main harness out of the way. 5. Locate and remove connector P7 from the left side of the Machine Control board. 6. insert the jumper wire (Red Wine No. 3), found in the service repair assembly, into position number 5 of the P7 connector, then reconnect the P7 connector back onto the Machine Control Board. 7. Remove the Yellow based indicator lamp found in the service assembly and position the lamp where the previous ON Light lamp assembly was previously removed. Then snap the new lamp assembly into the console. 8. Connect the White No. 11 wire and the Red No. 3 wire to the new yellow based lamp assembly. 9. Remove the existing electrical schematic taped to the rear wall of the console and replace with the electrical schematic found in the service assembly. 10. Reposition the console into the upright position on the topcover and secure the three screws fastening the console to the rear console cover plate. 11. Replacement is complete. 1...

Dieses Handbuch ist für folgende Modelle:
Waschmaschinen - 12001725 (46.11 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien