Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Only use the appliance on dr y hair. Do not use the appliance on ar tificial hair. • Keep the hot surfaces of the appliance away from your skin. • When the appliance is connected to the power, never leave it unattended. • Do not inser t any objects into the appliance. • Do not probe the ion outlet openings with metal objects. • Always unplug the appliance after use. • When the appliance is hot, keep it on a heat-resistant surface and never cover the appliance with anything, such as a towel or clothing. • Never use any accessories or par ts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or par ts, your guarantee becomes invalid. • Do not wind the mains cord round the appliance. • If you use the appliance on color-treated hair, the straightening plates may stain. • If the mains cord is damaged, you must have it replaced by Philips, a ser vice centre authorised by Philips or similarly qualified persons in order to avoid a hazard. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be super vised to ensure that they do not play with the appliance. • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. Electromagnetic fields (EMF) This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in an official collection point for recycling. By doing this, you help to preser ve the environment. Straighten your hair Ensure that you select a temperature setting that is suitable for your hair. Always select a low setting when you use the straightener for the first time. Hair Type Temperature Setting Coarse, curly,hard-to-straighten Mid to High (170 .C and above) Fine, medium-textured or softly waved Low to Mid (160 .C and below) Pale, blonde, bleached or color-treated Low (Below 160 .C) 1 Connect the plug to a power supply socket. 2 Press and hold the button ( ) until the display screen lights up. » The default temperature setting 180°C is displayed ( ). Note:Temperature memor y function - the temperature that is shown before you switching off the appliance will appear when you switch on the appliance again. 3 Press the ( ) or ( ) buttons to select a suitable temperature setting for your hair. » When the straightening plates have heated up to the selected temperature setting, the stable indication “READY” ( ) is displayed. 4 The ion function activates when the appliance is switched on, which provides additional shine and reduces frizz. » The ion indicator ( ) is displayed. » When the function is on, a special odor may be smelt and a sizzling noise may be heard, which is normal and caused by the ions that are generated. 5 Slide the closing lock ( ) downwards to unlock the appliance. 6 Comb your hair and take a section that is not wider than 5cm for straightening. 7 Place it between the straightening plates ( ) and press the handles firmly together. 8 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. 9 After 20 seconds, repeat step 7 to 8 until you achieve the desired look. 10 To straighten the rest of your hair, repeat steps 6 to 9. 11 To re-styling your hair, press and hold button ( ) for 3 seconds to switch on/off the touch-up function.This function ensures the right result with a reduced temperature and better protection. » When the function is on, the indication “STYLE REFRESH” ( ) is displayed and the temperature indication ( ) disappears. 12 Press the button ( ) again, or the / buttons to exit the touch-up function and the previous straightening temperature setting appears. Note:The appliance has auto-shut off function. It switches off automatically after 60 minutes. After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Clean the appliance and straightening plates by damp cloth. 4 Lock the straightening plates ( ). 5 Keep it in a safe and dr y place, free of dust.You can also hang it with the hanging loop ( ) or store it in the supplied pouch. 3 Guarantee and service If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at or contact the Philips Customer Care Centre in your countr y (you find its pho...