If you already have a satellite dish installed, note that you will need a Universal LNB which works on the frequencies 10.70 12.75 GHz to be able to handle digital signals. Connecting a TV and a VCR Preparing the Remote Control Antenna 12 RF TV Video SCART Satellite dish SCART See pages 13 and 14 if you want to connect to an analogue satellite receiver or connect in any other way. 2 1 x3 •Plug in your Mediamaster. • The ”First time installation” menu is shown. •Press the select button on the rem

Move the channels to the desired position using the UP/DOWN button and press OK. Rename List You can change the list name with the virtual keyboard on the screen. Type in the text you want using the remote control arrow keys. Please note that the All TV , All Radio , Free TV and Free Radio can not be changed. Delete the existing characters by pressing OK on the left arrow key of the keyboard. Select the characters using the LEFT and RIGHT buttons. Press the OK button to enter the text selected.

Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating, marked thus: If the fuse cover is detachable always refit the cover after replacing the fuse. NEVER use the plug with the fuse cover omitted. If the fitted plug is not suitable for your socket outlets it should be cut off, after having first removed the fuse, and an appropriate plug fitted in its place. If this new plug contains a fuse its value should be the same as that removed from the n

(“YES” is the default setting). Select “NO” to search only from the transponder that you have entered on line “Transponder Frequency”. (Useful if you do not want to search through all transponders for a specific Programme Distributor). By pressing the OK button you can now enter the menu from where the Mediamaster starts to search for channels from the satellite. SMATV or IF frequency channel search Model 9200 S only A SMATV network is commonly found in smaller block of flats. In such a network

Please note that during the Channel Search procedure, the Mediamaster has downloaded ALL available channels. This may include channels from various Service Providers, also those to which you normally do not have access. If you select a programme to which you do not have access, you will get the message “Service is scrambled or not running” on the screen. GB 13 TV Screen Format If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select “4:3 (Pan & Scan)” or “4

Press ok to confirm the new position. GB 19 Navi Bars Navi Bars Lock channels To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory. You can lock (and later unlock) channels on any of the lists in order to prevent your children from watching them, etc. • Select the channel you want to lock and press info. Repeat the procedure for each channel you want to lock. • Press opt if you want to preview the channel. • Press ok to confirm. A locked c

You may be required to upgrade your television aerial to enable full service reception. Contact information: Nokia Support: 01793 556 046, E-mail: NHC.sales@nokia.com Nokia, Nokia Connecting People and Navi Bars are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their owners. Nokia operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products des

Audio system With digital satellite reception, the sound is transmitted in packages and is elected either in a special audio mode or pre-selected by using the installation set-up. This makes it possible to select between several different languages in a film. The number of choices is dependent on what is available in the signal. CA Conditional Access. A system to control subscriber access to services, programmes and events. CA Module A device for the decoding of scrambled signals Common Interfac

The information you need to enter in this menu should be supplied by your broadcaster or local aerial installer. Channel: Select the channel you want to search for. Network search: Select “Yes” if you want to search on all transmitters connected to a specific network. • Press select to start searching for channels. • Within this menu you can also check the strength of your digital signal if you know the UHF channel numbers for your area (This information can be supplied by your local aerial inst