Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
and answer a call. If you press this key without entering a number, your phone shows the Keypad description most recently dialled, received and missed calls. KP235 Features Key Description Left soft key / Right soft key Each of these keys performs the function indicated by the text on the display immediately above it. Navigation keys Use to scroll through menus and move the cursor. You can also use these keys for quick access to the following functions. • Left navigation key ( ): Messaging Numeric keys These keys are used mainly to dial in standby mode and enter numbers or characters in editing mode. When you press these keys for a long time: • Used to call your voicemail box . • Used to add the international prefix . • Used to call Speed dials from to . • Used to enter a pause when dialling, or switch to vibrating mode . ~ • Right navigation key ( ): List of profiles • Up navigation key ( )/ Down navigation key ( ): Calendar, Contacts, Call history, Messaging, Camera, Internet END/PWR key Used to end or reject a call. This key is also used as the Power key by pressing and holding this key for a few seconds. Clear/Cancel Key Deletes a character with each press. Hold the key down to clear all input. Also use this key to go back to the previous screen. KP235 Features Side keys Key Description Up/Down side keys When you open the flip, you can control the volume of key tone in the standby mode and the volume during a call. Icon/Indicator Description Indicates that you are using GPRS. Tells you the strength of the network signal. Call is connected. You can use GPRS service. KP235 Features Display information The table below describes various display indicators or icons that appear on the phone’s display screen. On screen icons Shows that you are using a roaming service. Line 1/2 is in use for outgoing calls – if you subscribe to the Two Line Service. The alarm has been set and is on. Tells you the status of the battery. Icon/Indicator Description You have received a message. All audible signals are turned off. You have received a voice message. Normal profile is activated. Outdoor profile is activated. Silent profile is activated. Headset profile is activated. You can divert a call. Indicates that the phone is accessing the WAP. Getting started Installing the SIM card and the battery Make sure the power is off before you remove the battery. 1. Remove the battery. Press down on the tabs on the battery cover and slide the cover down. Now lift the battery from its compartment. Note ] Removing the battery from the phone when the power is on may cause the phone to malfunction. 2. Install the SIM card. Insert and slide the SIM card into the SIM card holder. Make sure that the SIM card is inserted properly and that the gold contact area on the card is facing downwards. To remove the SIM card, press down lightly and pull it in the reverse direction. To insert the SIM card To remove the SIM card Caution ] The metal contact of the SIM card can easily be damaged by scratches. Pay special attention to the SIM card while handling. Follow the instructions supplied with the SIM card. Getting started Getting started 3. Install the battery. Getting star te d Charging the battery To connect the charger to the phone, you must first install the battery. 1. With the arrow facing you as shown in the diagram, push the plug on the charger into the connector on the bottom of the phone until it clicks into place. 2. Connect the other end of the charger to the mains socket. Only use the charger included in the box. 3. The moving bars on the battery icon will stop once charging is complete. Caution ] Do not force the connector as this may damage the phone and/or the charger. ] If you use the charger out of your own country, use an attachment plug adapter for the proper configuration. ] Do not remove your battery or the SIM card while charging. Warning ] Unplug the power cord and charger during lightning storms to avoid electric shock or fire. ] Make sure that no sharp-edged items such as animal teeth or nails come into contact with the battery. This may cause a fire. Disconnecting thecharger Disconnect the charger from the phone as shown in the diagram below. Note ] Ensure the battery is fully charged before using the phone for the first time. ] If the battery is not properly charged, please turn the phone off and on using the power key. Then detach and reattach the battery, and recharge the phone. Turning your phone on and off Turning your phone on 1. Install a battery to the handset and connect the phone to an external power source such as the charger, or cigarette lighter adapter. Or install a charged battery pack to the handset. 2. Press and hold for a few seconds until the LCD screen is turned on. 3. Depending on the status of the PIN code request setting you may need to enter your PIN code. Turning your phone off Press and hold for a few seconds until the LCD screen is turned off. Getting started Getting started Getting started Acces...