NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of these copiers. The inch versions of these copiers are shown in the screens in this guide. If you are using the metric version, use the messages provided for the inch version as reference only. In the body text, only the inch messages are given if these versions differ only in capitalization. When there is even a slight difference in the message, we have listed the information for the in

4 Use the numeric keys to enter the copy quantity. You can specify up to 9,999 copies. NOTE: It is possible to restrict the maximum copy quantity. Refer to Chapter 3 of the Advanced Operation Guide. Press the Start key to start copy. 5 Basic Operation NOTE: You can adjust the angle of the operation panel as shown by releasing the operation panel lock lever. After adjustment, lock the lever again. When adjusting the angle of the operation panel, do not place your hands or fingers underneath the o

The length of time that the copier uses to recover from the energy saver (auto preheat) function can be selected between within 10 seconds (priority to recovery) and within 30 seconds (priority to power save). (See “Auto preheat time” on page 6-4 and “Preheat recovery time” on page 6-5.) (English text panel) (Symbol panel) 4. Auto shut-off function This function automatically turns the main switch OFF (O) if no copying operation is preformed for a certain period of time (15 to 120 minutes). To m

As an ENERGY STAR Partner, KYOCERA MITA AMERICA, INC. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. * ENERGY STAR is a U.S. registered mark. In this Instruction Handbook, the 1810 is referred to as the 18 ppm (pages per minute) copier and the 1510 is referred to as the 15 ppm copier. All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or b

[ Beenden] 1 2 3 TCP/IPIPv4 einstellen IPv6 einstellen TCP/IP-Einstell.: a b [ Beenden] 1 2 3 DHCP IP-Adresse Subnetzmaske IPv4 einstellen: a b [ Beenden] 1 2 Aus *An DHCP: a b 123.145.167.123 M IP-Adresse: a b 255.255.255.000 M Subnetzmaske: a b f f f f a b 1 Nastaveni TCP/IP [ Exit ] 1 2 3 TCP/IPNastaveni IPv4 Nastaveni IPv6 Nastaveni TCP/IP: a b [ Exit ] 1 2 3 DHCP Adresa IP Nastaveni IPv4: a b [ Exit ] 1 2 Vypnuto*Zapnuto DHCP: a b 123.145.167.123 M Adresa IP: a b 255.255.255.000 M a b f f f

3 FS1028MFP ......................................................................................................... 3 FS1118MFP ......................................................................................................... 5 FS1128MFP ......................................................................................................... 7 FSC1020MFP ...................................................................................................... 9 TASKALFA 180................