Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Olivetti Dateigröße: 5.58 mb Dateiname: d-Copia120D_150Dugen521905.pdf Unterrichtssprache:

Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. These will cause physical damage to the unit. ** For paper weighing from 104 to 128g/m2, A4 is the maximum size that can be fed through the single bypass. • Special papers such as transparency film, labels and envelope must be fed one sheet at a time through the single bypass. 15 3 LOADING THE PAPER TRAY 1 Raise the handle of the paper tray and pull the paper tray out until it stops. 2 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray. 3 Store the pressure plate lock which has been removed in step 2. To store the pressure plate lock, rotate the lock to fix it on the relevant location. 4 Adjust the paper guides on the paper tray to the copy paper width and length. Squeeze the lever of paper guide and slide the guide to match with the width of the paper. Move paper guide to the appropriate slot as marked on the tray. Pressure plate lock A B 16 5 Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks. 6 Gently push the paper tray back into the unit. Do not load paper above the maximum height line ( ). Exceeding the line will cause a paper misfeed. • After loading paper, to cancel the blinking without restarting copying, press the clear ( ) key. The in the display will go out and the start ( ) indicator will light up. • Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges. • Make sure all the paper in the stack is the same size and type. • When loading paper, ensure there is no space between the paper and the guide, and check if the guide is not set too narrow causing the paper to bend. Loading paper in these ways will result in document skew or a paper jam. • When not using the unit for an extended period, remove all paper from the paper tray and store it in a dry place. If paper is left in the unit for an extended period, the paper will absorb moisture from the air, resulting in paper jams. • When adding new paper to the paper tray, remove the old paper already contained in the tray. Placing new paper on top of the paper already contained in the tray may result in feeding two sheets at one time. BYPASS FEED (including special paper) The single bypass can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from A6 to A4/Legal and in the weight range of 52 to 128g/m2 can be used in this tray. (For paper weighing from 104 to 128g/m2, A4 is the maximum size.) • The single bypasscan hold one sheet of paper. • The original image must be smaller than the paper or media for copying. If the originalimage isbiggerthan thepaper ormedia, this may cause smudges on the edges ofthe copies. The single bypass • If you insert a sheet of paper into the single bypass when multiple 3 copies have been set with the copyquantity setting (p.49), the copy quantity setting will change to "0" and only one copy will be made. • When copying ontotransparency film,remove eachcopy promptly. Do not let copies stack up. 1 Select copy and print settings before you begin the copy job. For information on the copy settings, see "MAKING COPIES" (p.46). For information on the print settings, see the online manual or the Help file for the printer driver, and then begin printing from the single bypass. Set the paper guides to the paper width. Insert a single sheet of copy or print paper (print face down) into the feed slot of the single bypass. 2 Using copy mode When you insert the paper, the machine will automatically draw in the paper and begin copying. Using printer mode After appears in the display, wait until the Paper feed location indicator for the single bypass illuminates and insert the paper. The machine will automatically draw in the paper and begin printing. Print face Note for loading envelopes • Envelopes must be fed narrow side into the feed slot one sheet at a time. • Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. • Envelopes of which the surface is not flat because of embossing may cause the prints to become smudged. • Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed closed when printed. • Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly printed or may cause misfeeds. • Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.) • It is recommended that you perform a test print before performing the actual print job. 4 INSTALLING THE SOFTWARE 4 INSTALLING THE SOFTW...

Herunterladen

Geben Sie zwei Ziffern: