Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Olivetti Dateigröße: 5.58 mb Dateiname: Unterrichtssprache:

Click the "Olivetti d-Copia 150D" icon and click "Get picture" in "Imaging Tasks". Olivetti d-Copia 150D 3 The "Scanner and Camera Wizard" appears. Click "Next" and establish the basic settings for scanning. For information on the settings, see the Windows XP help file. After completing each setting, click "Next". 4 Select a name, format, and folder for the scanned image. For information on the image name, file format, and folder, see the Windows XP help file. 5 Scanning begins. When scanning ends, select the next task you wish to perform. For information on each selection, see the Windows XP help file. To quit the "Scanner and Camera Wizard", select "Nothing. I’m finished working with these pictures." and click "Next". 6 Click "Finish" in the screen that appears. The "Scanner and Camera Wizard" closes and the scanned image is saved. HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as the printer or scanner and a list of methods for dealing with printing or scanner problems. To access the online manual, your computer must have Acrobat Reader 5.0 or a later version. If it is not installed, refer to "Installing Acrobat Reader" (below). 1 2 3 4 Turn on your computer. Insert the supplied CD-ROM into your CD-ROM drive. Click the "start" button, click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. On Windows 95/98/Me/NT 4.0/2000, double-click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. Double-click the "MANUAL" folder, the "English" folder, and then the "d-Copia 120D, 150D Online EN.pdf" icon. The following window will appear. d-Copia 120D / d-Copia 150D 6 Click the button to read the online manual. To close the online manual, click the ( ) button located at the top-right of the window. • The online manual can be printed out using Acrobat Reader. OLIVETTI recommends printing out the sections which you refer to regularly. • Refer to "Help" of Acrobat Reader for more details on the operation and function of Acrobat Reader. Installing Acrobat Reader 1 2 3 4 Turn on your computer. Insert the CD-ROM into the CD-ROM drive. Click the "start" button, click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. Windows95/98/Me/NT4.0/2000, double-click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. Double-click the "Acrobat" folder, and then double-click the "ar500enu.exe" icon. Follow the on-screen instructions to install Acrobat Reader. USING OTHER INSTALLED DRIVERS If you use another GDI printer or a Windows Printing System printer, interference between printers may occur and printing may not be performed properly. To use another GDI printer or a Windows Printing System printer, you must change the port setting of the printer driver using the following procedure. If another printer does not operate properly when the Olivetti Personal MFP Series printer driver is set to "FILE" as described below, uninstall the Olivetti Personal MFP Series printer driver. To uninstall the printer driver, see the online manual. 1 2 3 Click the "start" button. Click "Control Panel", click "Printer and Other Hardware" and then click "Printer and Faxes". On Windows 95/98/Me/NT4.0/2000, select "Settings" and then click "Printers". Right-click the "Olivetti d-Copia 150D" icon in the printer dialog box and then click "Properties". Olivetti d-Copia 150D 4 Click the "Ports" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" dialog box, select "FILE": in the "Print to the following port" list box, and click the "OK". 5 6 Right-click the icon of the printer to be used and click "Properties". Click the "Ports" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" window, select "LPT1" (or the currently used port), and click the "OK" button. Touse the Olivetti Personal MFP Series again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. CONNECTING THE INTERFACE CABLE This unit includes both USB and parallel interface connectors. Interface cables for connecting the unit to your computer are not included with this unit. Please purchase the appropriate cable for your computer. • If youintend to use theunit asascanner, it must be connected to your computer with a USB interface cable. The scannerfunction cannot be used if the unit is connected with a parallel cable. • USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled. • Do not connect the interface cable before installing the MFP driver. The interface cable should be connected during installation of the MFP driver. (p.21) Connecting the USB interface cable Obtain a shielded USB interface cable. 1 4 2 Insert the cable into the USB interface connector located on the rear of the unit. 3 Insert the other end of the cable into the interface connector of your computer, or the USB hub connected...

Herunterladen

Geben Sie zwei Ziffern: