Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Canon Dateigröße: 4.98 mb Dateiname: Unterrichtssprache:

3-6) • Enlarging/reducing (p. 3-10) • Exposure (p. 3-12) • Image quality (p. 3-14) • Collate (p. 3-15) • 2 on 1 (p. 3-17) NOTE You cannot change settings during copying. 3-2 Copying Documents .. 4 Press [Start] to begin copying. SCANNING COPY NO. 0001 If the paper in the paper drawer or stack bypass runs out during copying, the LCD displays . Load paper in the paper drawer or stack bypass. When paper is loaded, the machine automatically resumes copying. NOTE • If you load paper while making copies, do not load a different paper size. • You can reserve the next copy job while the machine is outputting copies. (See “Reserved Copying,” on p. 3-21.) • After the machine finishes copying, the setting will remain. However, if you press [Stop/Reset], or if no key is pressed for two minutes, the paper feeding location will be reset to the paper drawer, and other settings will also be reset to the default settings. You can specify the time until the machine enters the mode. (See “Timer Settings,” on p. 4-7.) • The capacity of the output tray is 100 sheets (20 lb (80 g/m2)) of paper. To prevent paper jams, remove paper from the output tray before the count reaches 100. 3 Using Functions Copying Documents 3-3 Canceling a Copy Job While Scanning Documents in the ADF Canceling a Copy Job While Scanning Documents in the ADF .. 1 Press [Stop/Reset]. STOP KEY PRESSED PRESS SET KEY 3 Using the Copy Functions Set 2 Press [Set]. The document that has stopped in the ADF will come out. After Scanning Documents .. 1 Press [Stop/Reset]. CANCEL COPYING? 2 Press [4 ] for (Yes). If you do not want to cancel the copy job, press [e] for (No). 3-4 Canceling a Copy Job Making Multiple Copies You can make multiple copies. .. 1 Use the numeric keys to enter the number of copies you want . press [Start]. 100% LTR . TEXT 05 .. The LCD displays the number of copies you entered. You can make up to 99 copies. NOTE • You can reserve the next copy job while the machine is outputting copies. (See “Reserved Copying,” on p. 3-21.) • The LCD keeps on displaying the specified number of copies until copying finishes. When the auto clear function activates, the LCD returns to the standby display and the number of copies returns to 01 (factory default setting). 3 Using Functions Making Multiple Copies 3-5 Selecting the Paper Feed Location When making copies on paper that cannot be loaded in the paper drawer, such as thick paper, transparencies, labels, envelopes, or tracing paper, you can use the stack bypass. 1 Press [Paper Select] to select the paper feed location (paper drawer or stack bypass). 100% S.B. A# FREE .. 3 Using the Copy Functions TEXT 01 A If you select a paper type other than in . (See “Common Settings,” on p. 4-4.) # If you set to or . (See “Common Settings,” on p. 4-4.) NOTE • If you do not load paper in the stack bypass before you press [Paper Select], the message appears until you load paper or press [Stop/Reset]. (See “Loading Paper in the Stack Bypass,” on p. 5-9.) • When making copies on letter size paper after having continuously copied on paper smaller than letter size paper, the copies may be dirty. To prevent copies from being dirty, wait about one minute before making copies. • When making copies of a small size or using thick paper, the copy speed may be slightly slower than usual. • If you intend to make a copy and print with a thermal transfer printer on one sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a paper jam. • When copying onto transparencies, remove each transparency from the output tray as it is output. 3-6 Selecting the Paper Feed Location Specifying the Paper Size The default paper size is . Normally, you can make copies in this setting. However, the copy images or the back of the paper may become dirty. If this happens, you can prevent the paper from getting dirty by specifying the paper size according to the following instructions. NOTE • Press [4 ] or [e] to display/select the following menu items. Press [Set] after each selection. • To set ADDITIONAL FUNCTIONS, see “Accessing the Additional Functions Menu,” on p. 4-2. To Specify the Paper Size Every Time You Load Paper .. 1 Press [Additional Functions]. 2 Select . . . . Fixed Paper Size 3 Using Functions .. 1 Press [Additional Functions]. 2 Select . . . 3 Choose the appropriate paper size from: Selecting the Paper Feed Location 3-7 When you select , specify the width and length of the paper in millimeters. • Available setting range in length: 5" (127 mm) to 14" (356 mm) • Available setting range in width: 3" (76 mm) to 8 1/2" (216 mm) • Refer to the following conversion table for inches and millimeter...

Herunterladen

Geben Sie zwei Ziffern: