Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: York Dateigröße: 463.53 kb Dateiname: Unterrichtssprache:

Unit resistance is based on a dry evaporator coil and clean filters. 2. Available static pressure in IWG to overcome the resistance of the duct system and any accessories added to the unit. Refer to the blower motor and drive table and the accessory static resistance table for additional information. 3. Motors can be selected to operate into the service factor because they are located in the moving air stream, upstream of any heating device. units with steam or hot water coils are the only exception. On these units, the BHP must not exceed the nominal HP rating of the motor. TABLE 20: FAN PERFORMANCE DATA -30 TON1 RPM CFM 10,000 11,000 12,000 13,000 14,000 SP2 BHP3 KW SP2 BHP3 KW SP2 BHP3 KW SP2 BHP3 KW SP2 BHP3 KW 600 0.20 3.1 2.9 0.02 3.6 3.4 --------- 635 0.31 3.3 3.1 0.13 3.8 3.5 --------- 700 0.54 3.7 3.5 0.38 4.2 3.9 0.20 4.8 4.5 0.03 5.3 5.0 --- 775 0.85 4.4 4.1 0.70 4.8 4.5 0.54 5.3 5.0 0.39 5.8 5.5 0.20 6.4 6.0 800 0.97 4.7 4.4 0.82 5.1 4.8 0.66 5.6 5.2 0.52 6.1 5.7 0.35 6.7 6.3 875 1.34 5.6 5.2 1.19 6.0 5.7 1.04 6.6 6.2 0.93 7.1 6.6 0.77 7.7 7.2 900 1.47 5.9 5.5 1.33 6.4 6.0 1.17 7.0 6.5 1.07 7.5 7.0 0.90 8.2 7.6 940 1.70 6.5 6.1 1.55 7.0 6.6 1.40 7.7 7.2 1.31 8.3 7.8 1.09 9.0 8.4 1. Unit resistance is based on a dry evaporator coil and clean filters. 2. Available static pressure in IWG to overcome the resistance of the duct system and any accessories added to the unit. Refer to the blower motor and drive table and the accessory static resistance table for additional information. 3. Motors can be selected to operate into the service factor because they are located in the moving air stream, upstream of any heating device. units with steam or hot water coils are the only exception. On these units, the BHP must not exceed the nominal HP rating of the motor. Unitary Products Group 036-21335-002-A-1102 LA300 & LB360 TOTAL STATIC PRESSURE, IWG 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1000RPM 10B900 RHPPM 8 BHP 800 RPM 5 BHP 6 BHP 700 RPM 3 BHP 4BHP600 RPM 2BHP 500 RPM 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 CFM (X 100) Available external static pres- Internal unit resistance based sure for unit accessories and on a dry coil plus 2" the duct system. throwaway filters. FIGURE 16: BLOWER CURVE LA300 & LB360 Unitary Products Group 036-21335-002-A-1102 TABLE 21: FAN PERFORMANCE DATA -40 TON1 RPM CFM 12,800 14,400 16,000 17,600 19,200 SP2 BHP KW SP2 BHP KW SP2 BHP KW SP2 BHP KW SP2 BHP KW 600 0.20 4.3 3.7 ------------ 640 0.38 4.8 4.1 0.19 5.6 4.8 --------- 700 0.65 5.5 4.7 0.47 6.4 5.5 0.28 7.2 6.2 ------ 775 0.99 6.5 5.6 0.84 7.4 6.4 0.66 8.4 7.2 0.46 9.4 8.1 0.23 10.4 9.0 800 1.11 6.8 5.9 0.96 7.8 6.7 0.79 8.8 7.6 0.59 9.8 8.4 0.36 10.8 9.3 900 1.65 8.1 7.0 1.52 9.3 8.0 1.36 10.5 9.0 ------ 915 1.73 8.3 7.2 1.60 9.5 8.2 1.44 10.7 9.2 ------ 1. Unit resistance is based on a dry evaporator coil and clean filters. 2. Available static pressure in IWG to overcome the resistance of the duct system and any accessories added to the unit. Refer to the blower motor and drive table and the accessory static resistance table for additional information. TABLE 22: FAN PERFORMANCE DATA -50 TON1 RPM CFM 16,000 18,000 20,000 22,000 24,000 SP2 BHP KW SP2 BHP KW SP2 BHP KW SP2 BHP KW SP2 BHP KW 600 0.82 6.0 5.2 0.59 7.2 6.2 0.35 8.4 7.2 0.08 9.7 8.4 --- 660 1.17 7.3 6.3 0.96 8.5 7.3 0.73 9.8 8.5 0.45 11.2 9.7 0.14 12.7 11.0 700 1.40 8.2 7.1 1.21 9.4 8.1 0.98 10.7 9.2 0.70 12.2 10.5 0.40 13.7 11.8 760 1.76 9.5 8.2 1.59 10.8 9.3 1.38 12.3 10.6 1.11 13.8 11.9 0.81 15.6 13.5 800 2.00 10.4 9.0 1.85 11.8 10.2 1.64 13.3 11.5 1.38 14.9 12.9 1.09 16.9 14.6 900 2.60 12.8 11.0 2.49 14.5 12.5 2.35 16.0 13.8 ------ 930 2.78 13.5 11.6 2.68 15.3 13.2 --------- 1. Unit resistance is based on a dry evaporator coil and clean filters. 2. Available static pressure in IWG to overcome the resistance of the duct system and any accessories added to the unit. Refer to the blower motor and drive table and the accessory static resistance table for additional information. Unitary Products Group 036-21335-002-A-1102 LB480 TOTAL STATIC PRESSURE, IWG 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 15 BHP1000 RPM 12-1/2 BHP 900RPM 8 BHP10 BHP 800 RPM 5 BHP6 BHP 700 RPM 600 RPM 500 RPM 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 CFM (X 100) Available external static pressure for unit accessories and the duct system. Internal unit resistance based on a dry coil plus 2" throwaway filters. FIGURE 17: BLOWER CURVE LB480 Unitary Products Group 036-21335-002-A-1102 LB600 TOTAL STATIC PRESSURE, IWG 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 900 RPM 800 RPM 14 BHP16 BHP12 BHP 700RPM 8BHP 10 BHP 600 RPM 6 BHP500RPM 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 CFM (X 100) AvaIlable external static pressure for unit accessories and the duct system. Internal unit resistance based on a dry coil plus 1" throwa...

Herunterladen

Geben Sie zwei Ziffern: